1997 Kawasaki Jetting

Related:
Create New Tag

4/17/2018 11:12 AM

Stock carb, vforce 3 reeds, pc pipes.

Looking to see if anyone could give me the right jet specs for

2300ft.
3100ft
3900ft

|

4/18/2018 5:46 AM
Edited Date/Time: 4/18/2018 6:12 AM

The std jetting for a 97' kx250 , should be an N3WF needle, a 45 pilot ,and a 165 main, with a #7 slide, which IMO is a little rich.

I would suggest that you use a Suzuki NECW needle, and startout in the #3 clip position, along with a 42 pilot and 160 main, which should be plenty safe for your elevation. Start with the air screw set a 1.5 turns out.

here's the part# for the Suzuki needle. https://www.partzilla.com/product/suzuki/13383-37FD0?ref=5a77878e9329e098fcedea2aaeff653085536f51

|