1995 CR250 Kickstarter scrapes frame guard

1/1/2021 2:38pm Edited Date/Time 1/1/2021 7:45pm
My Kickstarter on my 1995 CR250 scrapes the frame guard and the brake lever. Is there a way to fix this or is it just worn out?

|
Paw Paw 271
Posts
3640
Joined
4/3/2013
Location
Benton, LA US
1/1/2021 3:17pm
Sounds like the kick lever pivot joint is worn a lot.
You can also see that the "works Connection frame guard sticks out from the frame.
You can either rebuild or replace the kick lever pivot or you can grind off material from the area of kick start that is making the contact and then polish it for looks.

Paw Paw
sandman768
Posts
5955
Joined
3/21/2014
Location
Saratoga Springs, NY US
1/1/2021 4:30pm
The kick start shaft also gets wear on the splines causing more play in the lever. You may be able to use a plastic hammer to mold the frame guard closer to the frame.
1/1/2021 6:32pm
I guess the only other option is a new Kickstarter. It has a lot of wobble. It is hitting the brake lever too.
1
Action69
Posts
399
Joined
9/25/2018
Location
Howard Beach, NY US
1/1/2021 7:45pm
You should still be able to get all of the parts to rebuild it.

Post a reply to: 1995 CR250 Kickstarter scrapes frame guard

The Latest