Posts: 6658
Joined: 5/5/2011
Location: Santa Clarita, CA USA
Has anyone tried the KTM hard parts map switch on their ‘17 or ‘18 150 ?
I believe the part # is #51539974200, but trying to confirm that it’s worth trying before spending another $80.
Any input would be greatly appreciated !!
Posts: 4538
Joined: 4/1/2008
Location: USA
There is a connector under the carb somewhere... it just detunes the bike so no need to add a switch ..
Posts: 4538
Joined: 4/1/2008
Location: USA
Posts: 6658
Joined: 5/5/2011
Location: Santa Clarita, CA USA
Oh crap... good thing I didn’t purchase that switch, before posting this.
Thanks for the input, saved me $80
Posts: 1908
Joined: 6/3/2018
Location: Bennett, CO USA
You have to take the tank off... maybe an inch and 1/4 long white connector. Should be under the down tube.
vomiting equals disqualification.
Posts: 6745
Joined: 11/30/2013
Location: Portland/Los Angeles, CA USA
I got this switch for my 125. It’s easier then keep pulling off the tank. I don’t use it often but does help on slick tracks vs. deep ones.
https://slavensracing.com/shop/ignition-map-switch-ktm-bauer/
