17 fc350 stuck in gear

ben5020
Profile picture for user ben5020
Posts
874
Joined
1/9/2016
Location
Malvern, PA US
ben5020
Edited Date/Time 6/26/2018 3:41am
Anybody ever have this issue? It won’t shift up or down and is stuck in one of the higher gears. The shifter moves up and down with ease but does not engage a different gear
|
RCF
Profile picture for user RCF
Posts
546
Joined
4/1/2008
Location
PA US
RCF 6/23/2018 2:17pm
6/23/2018 2:17pm
On the older bikes that used to happen all the time prong on the shift linkage with the spring on it gets stuck back and won't engage causing the bike to get stuck in gear pretty sure there's videos on YouTube on how to file it to prevent it from sticking again
RCF
Profile picture for user RCF
Posts
546
Joined
4/1/2008
Location
PA US
RCF 6/23/2018 2:19pm
6/23/2018 2:19pm
Here's a picture of the part that I'm talking about
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7357
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
Fantasy
2339th
CarlinoJoeVideo 6/23/2018 9:41pm
6/23/2018 9:41pm
What are all the scratches on the part on the left? Does the aluminum star piece move when you shift?

Sounds like something in the tranny broke. You may have to open it up to see.
RCF
Profile picture for user RCF
Posts
546
Joined
4/1/2008
Location
PA US
RCF 6/24/2018 5:07am
6/24/2018 5:07am
CarlinoJoeVideo wrote:
What are all the scratches on the part on the left? Does the aluminum star piece move when you shift? Sounds like something in the tranny...
What are all the scratches on the part on the left? Does the aluminum star piece move when you shift?

Sounds like something in the tranny broke. You may have to open it up to see.
That photo was just a reference photo so he would know what I was talking about the part with the spring is what gets stuck

The Shop

See All »
ben5020
Profile picture for user ben5020
Posts
874
Joined
1/9/2016
Location
Malvern, PA US
ben5020 6/24/2018 5:57am
6/24/2018 5:57am
No racing for this guy, thanks for the help guys I appreciate it
shaunbruce827 6/24/2018 7:33am
6/24/2018 7:33am
Pull off the inner clutch cover as pictured above, sometimes those star wheels can actually come loose and you won’t be able to select gears properly. I have seen it on a 2018 FC450 with low hours.
RCF
Profile picture for user RCF
Posts
546
Joined
4/1/2008
Location
PA US
RCF 6/25/2018 7:41pm
6/25/2018 7:41pm
Not good looks like gear teeth, do the 350 suffer the same problems as a 250 ? take it to the dealer it's a known problem it'll be covered.
ben5020
Profile picture for user ben5020
Posts
874
Joined
1/9/2016
Location
Malvern, PA US
ben5020 6/25/2018 7:54pm
6/25/2018 7:54pm
I’m not sure to be honest with you
MX915
Profile picture for user MX915
Posts
469
Joined
1/17/2018
Location
Central, NJ US
MX915 6/26/2018 3:31am
6/26/2018 3:31am
RCF wrote:
Not good looks like gear teeth, do the 350 suffer the same problems as a 250 ? take it to the dealer it's a known problem...
Not good looks like gear teeth, do the 350 suffer the same problems as a 250 ? take it to the dealer it's a known problem it'll be covered.
250 and 350 have different transmissions. 350 hasn't had the same issues.
ben5020
Profile picture for user ben5020
Posts
874
Joined
1/9/2016
Location
Malvern, PA US
ben5020 6/26/2018 3:41am
6/26/2018 3:41am
sandman768 wrote:
Oil drain bolt seen better days.......
Thanks for the input captain obvious

Post a reply to: 17 fc350 stuck in gear