Posts
540
Joined
1/29/2018
Location
Bethania, NC
US
Alec138
5/15/2019 9:55am
5/15/2019 9:55am
Went riding yesterday and noticed sometimes it would take a few button presses to get it started. Afterwards it runs great.
I started it up cold with choke, turned choke off let it idle. Let it sit for a minute or 2 to warm up, clicked into 1st and it stalled. So after it stalled i hit the button and it would not fire. Took roughly 4-5 tries before it fired. Ran fine after.
Went to truck after a few laps and it cooled off, went to start it again, fired up and stalled, same thing happened as when i started riding. Even after it had been ran for a while.
Just out a new battery (wps) in it a few months ago. What could be my issue? Was thinking maybe spark plug? Bike has 60hrs all stock. I woods ride it so im not on the limiter ever really.
I started it up cold with choke, turned choke off let it idle. Let it sit for a minute or 2 to warm up, clicked into 1st and it stalled. So after it stalled i hit the button and it would not fire. Took roughly 4-5 tries before it fired. Ran fine after.
Went to truck after a few laps and it cooled off, went to start it again, fired up and stalled, same thing happened as when i started riding. Even after it had been ran for a while.
Just out a new battery (wps) in it a few months ago. What could be my issue? Was thinking maybe spark plug? Bike has 60hrs all stock. I woods ride it so im not on the limiter ever really.
Paw Paw
Post a reply to: 16 350sxf starting issue....