150sx cylinder help

navalseabee
Posts
1086
Joined
5/5/2011
Location
Virginia Beach, VA US
8/5/2018 11:14am Edited Date/Time 8/5/2018 7:40pm
Anyone know if this part is available separate from the cylinder for the 16-18 150sx.
|
Paw Paw 271
Posts
3640
Joined
4/3/2013
Location
Benton, LA US
8/5/2018 12:24pm
It is part of the assembly and thus not available as a separate part.

Paw Paw
navalseabee
Posts
1086
Joined
5/5/2011
Location
Virginia Beach, VA US
8/5/2018 12:59pm
It is part of the assembly and thus not available as a separate part.

Paw Paw
Man i was hoping that's wasn't the case, the 250s have it as a stand alone part.
navalseabee
Posts
1086
Joined
5/5/2011
Location
Virginia Beach, VA US
8/5/2018 5:09pm
mines not broken, its like grooved inside up thus not allowing the o-rings to seal super well or last that long.

The Shop

BR8ES
Posts
1914
Joined
6/3/2018
Location
Bennett, CO US
8/5/2018 7:40pm Edited Date/Time 8/5/2018 7:44pm
3x44mm o-rings from McMaster are slightly oversized compared to OEM, may help that. Some have used liberal doses of Hi-Temp RTV too or hi-temp exhaust tape. Hi Temp exhaust putty, sanded and shaped will get the clearance you need and buy time until you locate another manifold.

Post a reply to: 150sx cylinder help

The Latest