150sx cylinder help

Related:
Create New Tag

8/5/2018 11:14 AM
Edited Date/Time: 8/5/2018 11:25 AM

Anyone know if this part is available separate from the cylinder for the 16-18 150sx.Photo

|

8/5/2018 12:24 PM

It is part of the assembly and thus not available as a separate part.

Paw Paw

|

8/5/2018 12:59 PM

Paw Paw 271 wrote:

It is part of the assembly and thus not available as a separate part.

Paw Paw

Man i was hoping that's wasn't the case, the 250s have it as a stand alone part.

|

8/5/2018 3:33 PM

|

Powerband in every gear !

8/5/2018 5:09 PM

mines not broken, its like grooved inside up thus not allowing the o-rings to seal super well or last that long.

|

8/5/2018 7:40 PM
Edited Date/Time: 8/5/2018 7:44 PM

3x44mm o-rings from McMaster are slightly oversized compared to OEM, may help that. Some have used liberal doses of Hi-Temp RTV too or hi-temp exhaust tape. Hi Temp exhaust putty, sanded and shaped will get the clearance you need and buy time until you locate another manifold.

|

vomiting equals disqualification.