Posts
551
Joined
4/11/2017
Location
The sticks, KY
US
4csHATER
2/13/2018 10:03am
2/13/2018 10:03am
Edited Date/Time
2/13/2018 5:21pm
i could have sworn at one time there was a nice machned oil sprayer from gytr that you had to run if running a better piston than oem.
eventually i heard that the oil sprayer was updated in 2016-17-18 for better spray angle and then the nice machined part went away.
they still make a super nice billet machined one for the 14-17 yz450f, just cant find it for the 250f
im currently in the middle if two very high dollar motor builds on the 14-15 motors and need to make sure im covering my ass on the oil spraying area of the motor.
eventually i heard that the oil sprayer was updated in 2016-17-18 for better spray angle and then the nice machined part went away.
they still make a super nice billet machined one for the 14-17 yz450f, just cant find it for the 250f
im currently in the middle if two very high dollar motor builds on the 14-15 motors and need to make sure im covering my ass on the oil spraying area of the motor.
Second, here’s the part number you are looking for:
1SM-15155-10-00
GYTR recommends it for any high-compression piston.
Edit: When you search for it, it says it fits the 16-17 models, but the GYTR page says otherwise.
Post a reply to: 14-15 YZ250F oil sprayer. part number.