13’ 450 KTM SXF won’t start

TJK11
Profile picture for user TJK11
Posts
6
Joined
2/28/2018
Location
Loganton, PA US
TJK11
I recently tore my bike done basically to the frame to give it a good cleaning and I sent out my suspension and completed all winter maintenance, after I reassembled the bike I started with no problems. I leaned it over and installed new rubbers in my rekluse and the bike won’t start. I have spark and I just put in a new fuel pump. I unplugged the roll over sensor to reset it, i just don’t know what else to do. Please help I’m headed south to battery park in 1 week
|
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7358
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
Fantasy
2339th
CarlinoJoeVideo 2/28/2018 10:16pm
2/28/2018 10:16pm
If you have spark it’s not the roll over sensor. Maybe when you leaned it over something clogged the injector? Did you see if you are getting fuel?

Maybe the plug fouled somehow?
TJK11
Profile picture for user TJK11
Posts
6
Joined
2/28/2018
Location
Loganton, PA US
TJK11 3/1/2018 3:57am
3/1/2018 3:57am
I have a rekluse auto clutch so you can’t bump start the bike, I have solid blue spark, and I still have spark even when I unplug the rollover sensor
kb228
Profile picture for user kb228
Posts
6161
Joined
1/31/2018
Location
Mansfield, OH US
kb228 3/1/2018 4:46am
3/1/2018 4:46am
FI codes?

The Shop

See All »
Paw Paw 271
Profile picture for user Paw Paw 271
Posts
3640
Joined
4/3/2013
Location
Benton, LA US
Paw Paw 271 3/1/2018 5:07am
3/1/2018 5:07am
Dirty or clogged injector could be the cause. Also go back and check the fuel pump connections. Was the new fuel pump an OEM unit or aftermarket unit? Is there inline fuel filters in the fuel lines?

Paw Paw
TJK11
Profile picture for user TJK11
Posts
6
Joined
2/28/2018
Location
Loganton, PA US
TJK11 3/1/2018 10:45am
3/1/2018 10:45am
Pump is an oem replacement with all new filters, I also put a new in line filter in as well. This is my first fuel injected bike so I’m a little unsure on how to check injectors but I will give it a shot when I get home from work.
TJK11
Profile picture for user TJK11
Posts
6
Joined
2/28/2018
Location
Loganton, PA US
TJK11 3/1/2018 10:46am
3/1/2018 10:46am
The FI light comes on for about 5 to 10 seconds when I first touch the starter
MX915
Profile picture for user MX915
Posts
469
Joined
1/17/2018
Location
Central, NJ US
MX915 3/1/2018 11:08am
3/1/2018 11:08am
You hear the fuel pump cycle if you touch and release the starter button?
TJK11
Profile picture for user TJK11
Posts
6
Joined
2/28/2018
Location
Loganton, PA US
TJK11 3/1/2018 2:59pm
3/1/2018 2:59pm
Fuel pump cycles, I’m trying to post the video

Post a reply to: 13’ 450 KTM SXF won’t start