Posts: 5
Joined: 2/28/2018
Location: Loganton, PA USA
I recently tore my bike done basically to the frame to give it a good cleaning and I sent out my suspension and completed all winter maintenance, after I reassembled the bike I started with no problems. I leaned it over and installed new rubbers in my rekluse and the bike won’t start. I have spark and I just put in a new fuel pump. I unplugged the roll over sensor to reset it, i just don’t know what else to do. Please help I’m headed south to battery park in 1 week
Posts: 6706
Joined: 11/30/2013
Location: Portland/Los Angeles, CA USA
If you have spark it’s not the roll over sensor. Maybe when you leaned it over something clogged the injector? Did you see if you are getting fuel?
Maybe the plug fouled somehow?
Posts: 1076
Joined: 10/28/2015
Location: Grand Terrace, CA USA
Posts: 5
Joined: 2/28/2018
Location: Loganton, PA USA
I have a rekluse auto clutch so you can’t bump start the bike, I have solid blue spark, and I still have spark even when I unplug the rollover sensor
Posts: 5506
Joined: 1/31/2018
Location: Mansfield, OH USA
Posts: 3388
Joined: 4/3/2013
Location: Benton, LA USA
Dirty or clogged injector could be the cause. Also go back and check the fuel pump connections. Was the new fuel pump an OEM unit or aftermarket unit? Is there inline fuel filters in the fuel lines?
Paw Paw
Posts: 5
Joined: 2/28/2018
Location: Loganton, PA USA
Pump is an oem replacement with all new filters, I also put a new in line filter in as well. This is my first fuel injected bike so I’m a little unsure on how to check injectors but I will give it a shot when I get home from work.
Posts: 5
Joined: 2/28/2018
Location: Loganton, PA USA
Posts: 324
Joined: 1/17/2018
Location: Central, NJ USA
Posts: 7
Joined: 1/31/2011
Location: Red rock, AZ USA
Posts: 5
Joined: 2/28/2018
Location: Loganton, PA USA
