07 CR250 triple clamps

Dobson110
Profile picture for user Dobson110
Posts
66
Joined
4/8/2017
Location
Sydney AU
Fantasy
31st
Dobson110
Hey guys, I’m looking at getting a set of aftermarket triple clamps for my 2007 CR250 and just wondering what everyone’s preferred offset is for the gen 3 cr’s. 20mm, 22mm or stock 24mm. The bike will be set up for motocross.
Thanks

Triple clamp offset

|
adam8781
Profile picture for user adam8781
Posts
670
Joined
12/22/2015
Location
CA
adam8781 7/11/2018 2:32pm
7/11/2018 2:32pm
22, for mx, if it was me, find a set of 08 crf450 triple clamps, they are 22 and bolt right on, than get the ride engineering steering damper frame mount to utilize the stock honda damper
.

20 would upset the balance imo.
Hondas4Life3
Profile picture for user Hondas4Life3
Posts
854
Joined
7/30/2013
Location
Louisburg, KS US
Hondas4Life3 7/12/2018 9:26am
7/12/2018 9:26am Edited Date/Time 7/12/2018 9:27am
I thought 22mm was stock?

I had 20mm clamps on my 07. I felt that it was to twitchy in high speed stuff so I switched to 22mm
H4L
Profile picture for user H4L
Posts
2499
Joined
3/18/2016
Location
CA US
H4L 7/12/2018 8:16pm
7/12/2018 8:16pm
The 02-07 CR2's came stock with 24mm clamps. Have owned pretty much each yr. except an 04 & never felt the need to use a different offset. These models turn as good as an RM & are stable like the YZ. Best of both worlds..
2

Post a reply to: 07 CR250 triple clamps