06 RM 250 Holeshot Device

Lucky13FIST
Profile picture for user Lucky13FIST
Posts
94
Joined
9/21/2014
Location
Chandler, AZ US
Lucky13FIST
Edited Date/Time 2/15/2018 10:18am
I am wanting to get a holeshot device for my 06 RM250. However, Nobody seems to make one for that bike anymore. Does anybody here know of one that will fit from another bike? Thanks.
|
LumpDog841
Profile picture for user LumpDog841
Posts
492
Joined
12/12/2016
Location
CO US
LumpDog841 12/30/2017 9:52am
12/30/2017 9:52am
I had a Works Connection on my 06 RM. That was the old design though and I can't find anything on their website. I would try calling them, they should be able to help you.
Bman_145
Profile picture for user Bman_145
Posts
867
Joined
12/30/2015
Location
Nor Cal, CA US
Bman_145 12/30/2017 12:33pm
12/30/2017 12:33pm Edited Date/Time 12/30/2017 12:38pm
Fly does, with two versions: a 2 button and single button. BTO has it in stock. Use the Pulp code and get a discount.
Frank
Profile picture for user Frank
Posts
643
Joined
12/29/2012
Location
WI US
Frank 12/31/2017 5:08am
12/31/2017 5:08am
Tamer still makes single and dual button set ups for the RM's. Pretty sure the Fly device is just a re-branded Tamer.
terry816mx
Profile picture for user terry816mx
Posts
12
Joined
1/7/2018
Location
Nashport, OH US
terry816mx 2/7/2018 3:49pm
2/7/2018 3:49pm
Does anyone know if you have to run different fork guards than stock because of the center guide that runs up the inside of the fork guards?

The Shop

See All »
Frank
Profile picture for user Frank
Posts
643
Joined
12/29/2012
Location
WI US
Frank 2/7/2018 4:31pm
2/7/2018 4:31pm
Change out the fork guards for late model RMZ450 guards. They bolt right up and don't use the guide/collar.
SK44
Profile picture for user SK44
Posts
41
Joined
2/13/2018
Location
Georgetown, TX US
SK44 2/15/2018 9:29am
2/15/2018 9:29am
Frank wrote:
Change out the fork guards for late model RMZ450 guards. They bolt right up and don't use the guide/collar.
Great info. I was wondering why I've seen some 04-08 RM's without the collars. Thank you!
terry816mx
Profile picture for user terry816mx
Posts
12
Joined
1/7/2018
Location
Nashport, OH US
terry816mx 2/15/2018 10:16am
2/15/2018 10:16am
Frank wrote:
Change out the fork guards for late model RMZ450 guards. They bolt right up and don't use the guide/collar.
SK44 wrote:
Great info. I was wondering why I've seen some 04-08 RM's without the collars. Thank you!
I actually just used good pair of side cuts and trimmed the center guide out of mine and removed guide ring instead of ordering another new pair of guards. Worked well.

Post a reply to: 06 RM 250 Holeshot Device