I am wanting to get a holeshot device for my 06 RM250. However, Nobody seems to make one for that bike anymore. Does anybody here know of one that will fit from another bike? Thanks.
I am wanting to get a holeshot device for my 06 RM250. However, Nobody seems to make one for that bike anymore. Does anybody here know of one that will fit from another bike? Thanks.
I had a Works Connection on my 06 RM. That was the old design though and I can't find anything on their website. I would try calling them, they should be able to help you.
Edited Date/Time:
Fly does, with two versions: a 2 button and single button. BTO has it in stock. Use the Pulp code and get a discount.
Tamer still makes single and dual button set ups for the RM's. Pretty sure the Fly device is just a re-branded Tamer.
Does anyone know if you have to run different fork guards than stock because of the center guide that runs up the inside of the fork guards?
Change out the fork guards for late model RMZ450 guards. They bolt right up and don't use the guide/collar.
I actually just used good pair of side cuts and trimmed the center guide out of mine and removed guide ring instead of ordering another new pair of guards. Worked well.