05 Kx250 fork fluid ?

Related:
Create New Tag

12/10/2018 7:47 AM

Hey guys, keep getting conflicting answers about fluid levels in the putter tubes, I’m 190 vet intermediate and front end is bottom with compression maxed out. I’m sending everything out to proline next month but need to get a handle on this for a race this weekend.

What is the max I can put in the outters? Some say 320 and others say 600 with 160cc in the dampers.

Right now I have .44 springs in the front and previous shop says they put 350 in each leg.

Thanks for your help

|

12/10/2018 8:07 AM
Edited Date/Time: 12/10/2018 8:07 AM

Fork Fluid level should be measured in MM from the top of the fork tube after it has been bled and bottomed out for measurement.

What range does the manual recommend?

|

12/10/2018 8:15 AM

527Mx wrote:

Hey guys, keep getting conflicting answers about fluid levels in the putter tubes, I’m 190 vet intermediate and front end is bottom with compression maxed out. I’m sending everything out to proline next month but need to get a handle on this for a race this weekend.

What is the max I can put in the outters? Some say 320 and others say 600 with 160cc in the dampers.

Right now I have .44 springs in the front and previous shop says they put 350 in each leg.

Thanks for your help

here you go.

https://www.howtomotorcyclerepair.com/images/Kawasaki-KX-125-KX250-Service-Manual-2003-2004-2005-2006-2007-2008.pdf

|

2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F

80% of the time it works every time
IG @hammerfamily_4 & @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals

12/10/2018 8:19 AM

Photo
|