Can someone with a CRF150R measure something for me?

Moto Mofo
Posts
853
Joined
1/17/2008
Location
TX US
1/26/2016 8:16am Edited Date/Time 1/29/2016 9:47am
I need to know how far apart the two mounting bolts are for the rear master cylinder, center to center. Trying to see if it's the same as a CR85. Any help is greatly appreciated!
|
mjr119
Posts
864
Joined
4/1/2008
Location
US
1/26/2016 9:03am
I dont have one to measure but I would say that it probably is the same.
Moto Mofo
Posts
853
Joined
1/17/2008
Location
TX US
1/26/2016 11:18am
I'm hoping the bolt spacing is the same, but the two master cylinders are different. The CR85 uses a remote reservoir, and the CRF150R has the newer style, with integrated reservoir like on all the big bikes these days.
mjr119
Posts
864
Joined
4/1/2008
Location
US
1/26/2016 12:29pm
Right I know what you mean. I had a 03 YZ125 back in the day and I upgraded to the newer 04 style when they changed that. FWIW it worked for me. Good luck! I am sure someone with first hand knowledge of the 150R will chime in soon.
Moto Mofo
Posts
853
Joined
1/17/2008
Location
TX US
1/26/2016 5:57pm
Thanks, hopefully someone can help me out!

The Shop

Jack_Wagon
Posts
284
Joined
7/18/2011
Location
Conyers, GA US
1/26/2016 7:19pm Edited Date/Time 1/26/2016 7:24pm
It's the same master cylinder as a CRF250 and 450. Roughly 48.5 mm or 1.9 inches
Moto Mofo
Posts
853
Joined
1/17/2008
Location
TX US
1/28/2016 9:22am
Jack_Wagon wrote:
It's the same master cylinder as a CRF250 and 450. Roughly 48.5 mm or 1.9 inches
Thanks for the dimensions! Sounds like it'll work for what I'm trying to do. Your help is greatly appreciated!
1/29/2016 9:47am
As posted in my project thread:

Crf 450 -14 cylinder, right c-c measurement.
But it rubs against the frame, I think you can dremel it down. But spacing is correct.

Post a reply to: Can someone with a CRF150R measure something for me?

The Latest