99 YZ 250 question

Mx814
Posts
59
Joined
11/18/2014
Location
MO US
3/5/2015 10:53am Edited Date/Time 3/5/2015 7:51pm
I am building a 99 yz250 & want to install the tank,seat & subframe off a 02 or newer yz. I can't seem to find the post on here where someone did something similar. Can anyone help me out?
|
mxrose3
Posts
2170
Joined
8/17/2006
Location
Delmar, DE US
Fantasy
853rd
3/5/2015 2:51pm
Do a search on Thumpertalk. Pretty sure there have been a few guys over there do it.
If you want to go one step better, I have a 2004 YZ250 frame, seat, airbox and some used plastics I could sell. I don't have an extra tank or subframe.
Mx814
Posts
59
Joined
11/18/2014
Location
MO US
3/5/2015 7:37pm
mxrose3 wrote:
Do a search on Thumpertalk. Pretty sure there have been a few guys over there do it. If you want to go one step better, I...
Do a search on Thumpertalk. Pretty sure there have been a few guys over there do it.
If you want to go one step better, I have a 2004 YZ250 frame, seat, airbox and some used plastics I could sell. I don't have an extra tank or subframe.
Thanks. I already have the parts. Was just needing to know about mounting the radiators, tank, & subframe. I'll keep looking.
PM me how much you want for your parts tho. Could always use some spare parts.
3/5/2015 7:51pm
my 00' all it took for the tank and shrouds is two peices of striaght metal for the tank mounts and for the shrouds i drilled a small hole in the plastic bracing on the back of the shroud and ran a zip tie from that through the radiation mounting hole. when making the tank mounts do it with the seat mounted so it all lines up. very simple. i personally like the rear end on the older bikes, so i didnt touch that. hope this helps



Post a reply to: 99 YZ 250 question

The Latest