Wiring on a Wr 500

shue415
Posts
131
Joined
1/25/2014
Location
Sioux City, IA US
8/12/2018 4:47pm Edited Date/Time 8/13/2018 7:15pm
i got another Wr 500
Im having a problem with the wiring
On the coil,there is 1 wire that plugs in to a wire that has 1 lead and a ground wire
Im sure the ground wire goes on one of the screws that hold the coil to the frame
When I attach the wire,I get no spark,when I leave the wire not hooked to anything I get spark
Its a simple wire job,but what am I doing wrong?
Anybody have a Yz 490 or Wr 500 that can check where the ground wire goes,,and why do get spark when its not attached?
|
Paw Paw 271
Posts
3640
Joined
4/3/2013
Location
Benton, LA US
8/12/2018 5:22pm
Does that wire go to the kill switch?

Paw Paw
shue415
Posts
131
Joined
1/25/2014
Location
Sioux City, IA US
8/12/2018 5:32pm
No,it plugs into a wire from the CDI
pete24
Posts
2733
Joined
10/20/2011
Location
Marlborough, MA US
8/12/2018 5:44pm
im pretty sure it goes to the voltage regulator, make sure your kill switch works properly and just tape it up and dont use it
shue415
Posts
131
Joined
1/25/2014
Location
Sioux City, IA US
8/12/2018 5:51pm
I hope so,,its #10 on this

The Shop

shue415
Posts
131
Joined
1/25/2014
Location
Sioux City, IA US
8/12/2018 5:52pm
Kill switch works
chuckie108
Posts
791
Joined
2/8/2012
Location
Mira Loma, CA US
8/13/2018 7:15pm
It goes to the kill switch, and then into the wiring harness. The eyelet end goes onto the coil mount bolt. All the wires should have the same colors, usually black with a white stripe.

Post a reply to: Wiring on a Wr 500

The Latest