Wanted to buy: HRC Radiator Cap 1.8 bar

Related:
Create New Tag

5/13/2018 9:36 PM
Edited Date/Time: 5/13/2018 9:48 PM

Looking for a 1.8 bar HRC radiator cap for my 2000 RC250M build.. they were used on most of the HRC team bikes from 1997 to the mid-2000's or even later so should be quite a few of them out there..
Photo

|

5/14/2018 5:17 AM

If you are unable to find one, replicate the decal and install it yourself.

|

5/14/2018 11:05 AM

Brett Campbell wrote:

If you are unable to find one, replicate the decal and install it yourself.

I was thinking of that as a last resort.. it costs me $62 to make a quality decal.. 1 decal or 30 decals.. almost the same price.

I can get a late model (round type) HRC radiator cap for about 60 euros, so will try hard and get the real item consistent with the build.

|

5/14/2018 11:46 AM

found!!

|

5/14/2018 11:46 AM

You're getting ripped off with a price like that. If you have the design drawn up it's pennies to have them printed. Warranty seal stickers would cost me about £10 for 200.

Get on Freelancer and people will bid to copy and produce the artwork. It's a basic design, so it'll be quite cheap, and I've used the service before with good results. https://www.freelancer.com/

|

5/14/2018 11:59 AM

Mr Happy wrote:

You're getting ripped off with a price like that. If you have the design drawn up it's pennies to have them printed. Warranty seal stickers would cost me about £10 for 200.

Get on Freelancer and people will bid to copy and produce the artwork. It's a basic design, so it'll be quite cheap, and I've used the service before with good results. https://www.freelancer.com/

Mr. Happy is correct. That is too expensive. This guy does great work and is very cheap. I have used him a few times for custom decals.
http://www.bdesigns.ca/

|

5/14/2018 12:21 PM

Mr Happy wrote:

You're getting ripped off with a price like that. If you have the design drawn up it's pennies to have them printed. Warranty seal stickers would cost me about £10 for 200.

Get on Freelancer and people will bid to copy and produce the artwork. It's a basic design, so it'll be quite cheap, and I've used the service before with good results. https://www.freelancer.com/

Brett Campbell wrote:

Mr. Happy is correct. That is too expensive. This guy does great work and is very cheap. I have used him a few times for custom decals.
http://www.bdesigns.ca/

I live in the NYC area so everything is much more expensive. Cost of living is much higher here. But the guy does a great job and I can pick it up down the street at the end of the day.

|

5/14/2018 12:56 PM

For future reference the guy I listed is in Canada.

|

5/14/2018 9:11 PM

kawasaki part number: 49085-1077

|

5/16/2018 7:44 PM
Edited Date/Time: 5/16/2018 7:45 PM

That was the easiest new "HRC" part I have come across.. I bought one for each of my Honda's. Who would of thought that junior needed a 1.8 bar high pressure cap on his 65cc KX like the factory boys on their 250 2Ts and 450s.

Since I am on a roll, I wonder if you guys know about the alternative uses of the HRC kill switch.. I know it had former uses on Honda low end cars in Europe and on the publically available HRC road racers some years back. Here is a picture of it. The Honda part # is; 35130-NC8-000
Photo

|

5/17/2018 1:27 AM
Edited Date/Time: 5/17/2018 1:27 AM

https://www.tso.us.com/parts-book/honda/0125rs125/1997/3_part_pages/f_02.asp

just Google the part number TT.
This was the first site that came up
You did the hard part finding the part number

|

5/17/2018 3:14 AM
Edited Date/Time: 5/17/2018 3:14 AM

MaxPower wrote:

https://www.tso.us.com/parts-book/honda/0125rs125/1997/3_part_pages/f_02.asp

just Google the part number TT.
This was the first site that came up
You did the hard part finding the part number

Naturally that is the first thing I did and have being doing that for the past 12 months for sites all over the world. The part number I am looking for isn't in the page you came up with, just pieces of the number. That model RS uses a different kill switch.

|

5/17/2018 7:36 AM

my mistske. I thought the 3rd line was the kill button. I know you must know what you are doing if you are replicating Works bikes.

|

5/17/2018 7:51 AM

no worries.. 3rd line is the kill switch but doesn't match the part number I am looking for

|