Thread Pitch...79 CR250

ledger
Posts
3673
Joined
1/17/2013
Location
TN US
5/25/2018 2:28pm
Can someone please tell me the pitch of the 10x20 bolts for the footpeg mounts on a 79 CR250 ? I know 1.25 is the common,just not sure on larger bolts. I've surfed the web enough to get a migrain, any help is appreciated.
|
MaxPower
Posts
2646
Joined
8/15/2006
Location
NJ US
5/25/2018 6:09pm
what size head is on the bolt?
ledger
Posts
3673
Joined
1/17/2013
Location
TN US
5/25/2018 8:20pm
MaxPower wrote:
what size head is on the bolt?
Two bolts on one side is 14, the two on other side is 12.
5/26/2018 12:03am Edited Date/Time 5/26/2018 12:07am
M10 X 1.25, they should all have 14mm hex head.

M8 X 1.25, they should all be 12mm hex head.

M6 X 1.00, they should be 10mm hex. (Not 8mm, that came a year later)

The M5"s for the coil mount are M5 X 0.8. These should be Philips pan head screws.

Are you looking for taps to clean the threads? Or for bolts to use?
We make all the fasteners for Rockets.
Stevie
ledger
Posts
3673
Joined
1/17/2013
Location
TN US
5/26/2018 5:16pm
StevieD113 wrote:
M10 X 1.25, they should all have 14mm hex head. M8 X 1.25, they should all be 12mm hex head. M6 X 1.00, they should be...
M10 X 1.25, they should all have 14mm hex head.

M8 X 1.25, they should all be 12mm hex head.

M6 X 1.00, they should be 10mm hex. (Not 8mm, that came a year later)

The M5"s for the coil mount are M5 X 0.8. These should be Philips pan head screws.

Are you looking for taps to clean the threads? Or for bolts to use?
We make all the fasteners for Rockets.
Stevie
Perfect, I just ran across all the Titanium that you offer for the 78-80's. I see you also sell the drilled tank washer's that I've been looking for. Let me make a list and I'll be placing an order from you in the next few days. Thanks for the info, much appreciated.

Post a reply to: Thread Pitch...79 CR250

The Latest