Moto Cross mag May 1984 Mugen article

Smed
Posts
114
Joined
11/21/2016
Location
KYABRAM, VIC AU
Edited Date/Time 8/29/2022 8:44am

Does anyone have a copy of this issue that I could get a scan of the Mugen kit article, I have the kit, Interested to hear the opinion BITD
2
|
CR-Dude4
Posts
167
Joined
8/22/2022
Location
unknown, TX US
8/23/2022 7:19pm
Love those classic Moto rags. I wish I kept mine.
2
Smed
Posts
114
Joined
11/21/2016
Location
KYABRAM, VIC AU
8/25/2022 3:34am



My 84 CR125 with Mugen top end, pipe & tank, Along with some other goodies
7
Smed
Posts
114
Joined
11/21/2016
Location
KYABRAM, VIC AU
8/25/2022 3:35am
I know i have that issue…somewhere
That would be great if you could find it, Cheers

The Shop

CR-Dude4
Posts
167
Joined
8/22/2022
Location
unknown, TX US
8/28/2022 3:23pm
Smed wrote:
[img]https://p.vitalmx.com/photos/forums/2022/08/25/565433/s1200_300308899_861513951478603_5016488386707839292_n.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2022/08/25/565432/s1200_300406704_8693025897389756_2364437931936273623_n.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2022/08/25/565434/s1200_300539968_1198552357375384_6073886912738404873_n.jpg[/img] My 84 CR125 with Mugen top end, pipe & tank, Along with some other goodies



My 84 CR125 with Mugen top end, pipe & tank, Along with some other goodies
Kit bike? Where the hell did you get that?
Smed
Posts
114
Joined
11/21/2016
Location
KYABRAM, VIC AU
8/29/2022 1:29am
Smed wrote:
[img]https://p.vitalmx.com/photos/forums/2022/08/25/565433/s1200_300308899_861513951478603_5016488386707839292_n.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2022/08/25/565432/s1200_300406704_8693025897389756_2364437931936273623_n.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2022/08/25/565434/s1200_300539968_1198552357375384_6073886912738404873_n.jpg[/img] My 84 CR125 with Mugen top end, pipe & tank, Along with some other goodies



My 84 CR125 with Mugen top end, pipe & tank, Along with some other goodies
CR-Dude4 wrote:
Kit bike? Where the hell did you get that?
I wish it was a kit bike , Was a stock 84 CR125 that I fitted the parts to, The tank was on a bike I purchased about an hours drive from home on a gamble as at the time I did not know it was a Mugen tank. I found the top end & pipe also an hour from home but in the opposite direction to where the tank came from, The other parts where collected here & there over the years
3
CR-Dude4
Posts
167
Joined
8/22/2022
Location
unknown, TX US
8/29/2022 5:14am
Smed wrote:
[img]https://p.vitalmx.com/photos/forums/2022/08/25/565433/s1200_300308899_861513951478603_5016488386707839292_n.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2022/08/25/565432/s1200_300406704_8693025897389756_2364437931936273623_n.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2022/08/25/565434/s1200_300539968_1198552357375384_6073886912738404873_n.jpg[/img] My 84 CR125 with Mugen top end, pipe & tank, Along with some other goodies



My 84 CR125 with Mugen top end, pipe & tank, Along with some other goodies
CR-Dude4 wrote:
Kit bike? Where the hell did you get that?
Smed wrote:
I wish it was a kit bike , Was a stock 84 CR125 that I fitted the parts to, The tank was on a bike I...
I wish it was a kit bike , Was a stock 84 CR125 that I fitted the parts to, The tank was on a bike I purchased about an hours drive from home on a gamble as at the time I did not know it was a Mugen tank. I found the top end & pipe also an hour from home but in the opposite direction to where the tank came from, The other parts where collected here & there over the years
The weld on the swing arm and the fuel tank fooled me, Hoss. LOL! Good one bruh. Enjoy!Cool
Hasletjoe
Posts
438
Joined
7/29/2013
Location
Haslet, TX US
8/29/2022 7:22am
Smed, I just looked and I happen to have that issue. I can scan it and send to you. It is very short two page article.

Smed
Posts
114
Joined
11/21/2016
Location
KYABRAM, VIC AU
9/1/2022 3:25am
Hasletjoe wrote:
Smed, I just looked and I happen to have that issue. I can scan it and send to you. It is very short two page article.

Thanks heaps Hasletjoe, interesting they say improved top end, My bike seems to be very flat on the top end but has awesome midrange, I installed the mainjet Mugen recommend but also aware that was a long time ago & fuels have changed, I need to spend some time with jets, I never ran the bike with the stock top end so have no before & after to compare, It is very different to other 125's I have owned though, It works best by rolling on through the midrange & building to the top end, Not just holding it on the stops .

Post a reply to: Moto Cross mag May 1984 Mugen article

The Latest