Bing Jet Question

Related:
Create New Tag

5/3/2018 11:30 AM

Can anyone confirm if this Bing jet will fit the 32 mm Bing carb? Specifically, the Bing 54 for the '73-77 Can Am's with the tickler or lever choke. I have a 35 idle jet and the clip on the needle all the way to the top and it's still a little too rich right off idle. Idle/air screw way out as well. Thanks for anyone that can confirm before I order one (and i still like bings, i'm not switching the whole thing out for a Mikuni!).

https://www.ebay.com/itm/Rickman-NOS-Zundapp-125-MX-SD-26-mm-Bing-Carburetor-30-Idle-Jet-p-n-R058-05-062/291857899237?epid=2083195231&hash=item43f4161ee5:g:-ukAAOSwIgNXwf22&vxp=mtr

|

5/3/2018 3:47 PM

jd6L wrote:

Can anyone confirm if this Bing jet will fit the 32 mm Bing carb? Specifically, the Bing 54 for the '73-77 Can Am's with the tickler or lever choke. I have a 35 idle jet and the clip on the needle all the way to the top and it's still a little too rich right off idle. Idle/air screw way out as well. Thanks for anyone that can confirm before I order one (and i still like bings, i'm not switching the whole thing out for a Mikuni!).

https://www.ebay.com/itm/Rickman-NOS-Zundapp-125-MX-SD-26-mm-Bing-Carburetor-30-Idle-Jet-p-n-R058-05-062/291857899237?epid=2083195231&hash=item43f4161ee5:g:-ukAAOSwIgNXwf22&vxp=mtr

First off that's not a Idle, it's a pilot jet & yes it will fit the 32 mm bing!

Now read this & remember " Bing jets are made of soft brass & need to be replaced more often"

If I where you I'd replace the needle jet & the needle, then look at the slide as they ware too! send me a PM & I'll send you a a bunch if Bing tuning info!

Howard

|

00' BMW K1200 RS
83' Maico 490 ( The Project bike)
81' Maico 490- FOR SALE
03' KTM 525 SX (In ICU)
14.5 KTM 450 Fe- FOR SALE