86 CR250R restore/build

PNWRider
Profile picture for user PNWRider
Posts
476
Joined
1/31/2021
Location
Stanwood, WA US
PNWRider
Edited Date/Time 1/1/2022 4:47pm
(Originally posted in tech help, then realized this section would be more appropriate).

Hello all,
I am about to undertake a resto on an 86 CR250. My goal is to build it like RJ’s 86 (of course…lol). I have started tracking down some parts. One thing I ran across was a couple builds referencing replic HRC power valve and ignition/clutch covers. I’ve been able to find the clutch/ignition covers from someone, but cannot locate the HPP covers, which have the external bolts (which I’m guessing were/are for adjusting the power valve preload or similar). They mentioned getting them from Italy but so far no luck. If anyone has a lead I’d appreciate it.

Also, if anyone has the codes for correct powdercoating on the frame and engine I’d appreciate it. That said, maybe cerakote is better for the engine? This bike will be mostly or completely display only, and I’ll be building a more utilitarian second bike as a rider.
1
|
TTperra
Profile picture for user TTperra
Posts
311
Joined
9/15/2015
Location
SE
TTperra 12/29/2021 2:56pm
12/29/2021 2:56pm
If its a display bike, i would use 2K wet paint to get the right color.
R-119 Flash red
rmxfreak
Profile picture for user rmxfreak
Posts
106
Joined
5/26/2017
Location
NZ
rmxfreak 12/30/2021 1:51pm
12/30/2021 1:51pm
Here’s my 86 -was running a full answer system but now has a proper old school pro circuit silencer and pipe





7
JMX247
Profile picture for user JMX247
Posts
166
Joined
10/26/2014
Location
Santa Clarita, CA US
Fantasy
1296th
JMX247 1/1/2022 3:21pm
1/1/2022 3:21pm
Contact willy.frasca@libero.it about the HRC Replica covers, I got a set for my 89 build. I think he is from Italy and it took about half a year for him to make and ship them but it was worth the wait.
5
PNWRider
Profile picture for user PNWRider
Posts
476
Joined
1/31/2021
Location
Stanwood, WA US
PNWRider 1/1/2022 4:47pm
1/1/2022 4:47pm
JMX247 wrote:
Contact willy.frasca@libero.it about the HRC Replica covers, I got a set for my 89 build. I think he is from Italy and it took about half...
Contact willy.frasca@libero.it about the HRC Replica covers, I got a set for my 89 build. I think he is from Italy and it took about half a year for him to make and ship them but it was worth the wait.
Wow, thanks! Those are the ones.

1

The Shop

See All »
PNWRider
Profile picture for user PNWRider
Posts
476
Joined
1/31/2021
Location
Stanwood, WA US
PNWRider 1/1/2022 4:49pm
1/1/2022 4:49pm
Thanks for all of your replies.

I did have one other question…I’m looking at getting spec bolts resto and engine kits. Since I have the 89 clutch cover mod, would an 89 kit work on the rest of the motor (since I’d need the 89 set for the clutch cover/side case)? Or are there other differences for fasteners on the 86 vs 89?

Post a reply to: 86 CR250R restore/build