1991 CR250R

mnmxer368
Profile picture for user mnmxer368
Posts
19
Joined
5/15/2014
Location
Rochester, MN US
mnmxer368
Edited Date/Time 9/7/2018 4:18pm
So I'm in the process of buying a 91 cr250 for $100. It's set up for hill climbing right now, but needs some parts. Does anyone know what parts interchange with other years? Would like to find a swing arm that isn't extended to ride Moto.
|
wertman194
Profile picture for user wertman194
Posts
110
Joined
2/11/2018
Location
Puyallup, WA US
wertman194 9/5/2018 4:55am
9/5/2018 4:55am
Fleabay usually has all the parts you need although you really never know the real condition until it shows up at your door.
1
mxrose3
Profile picture for user mxrose3
Posts
2170
Joined
8/17/2006
Location
Delmar, DE US
Fantasy
1046th
mxrose3 9/5/2018 8:36am
9/5/2018 8:36am
pretty sure the 90' and 91' swingarms were the same (maybe later years too) - but check any of the part numbers with any of the OEM parts finders on the web.
450exc115
Profile picture for user 450exc115
Posts
664
Joined
11/6/2014
Location
Hebron, CT US
450exc115 9/5/2018 9:30am
9/5/2018 9:30am
CR500 from 90-01 are basically the 90-91 CR250R. Lots of part available.
mnmxer368
Profile picture for user mnmxer368
Posts
19
Joined
5/15/2014
Location
Rochester, MN US
mnmxer368 9/5/2018 9:34am
9/5/2018 9:34am
wertman194 wrote:
Fleabay usually has all the parts you need although you really never know the real condition until it shows up at your door.
Everything except a swing arm

The Shop

See All »
sandman768
Profile picture for user sandman768
Posts
6071
Joined
3/21/2014
Location
Saratoga Springs, NY US
sandman768 9/5/2018 5:52pm
9/5/2018 5:52pm
wertman194 wrote:
Fleabay usually has all the parts you need although you really never know the real condition until it shows up at your door.
mnmxer368 wrote:
Everything except a swing arm
Be patient.... What you need will show up eventually...
VintageRacer 9/5/2018 7:50pm
9/5/2018 7:50pm
I have a swingarm from a 91 CR 500, not sure if they are the same or not.
avmechanic
Profile picture for user avmechanic
Posts
209
Joined
2/13/2016
Location
Langley BC CA
avmechanic 9/7/2018 3:32pm
9/7/2018 3:32pm
You have some work ahead of you there but fantastic you are going to save it. They are really a great bike. I love the HPP motors. Good usable power over a broad range. I would do a fork conversion to some later Honda Twin chamber 47mm forks. The newer the better. 90/91 CR250 Swingarm is the same. I believe the 91/92 CR125 swingarm is also the same. The 91 to 2001 CR500 swingarm will also work. There was a change in the CR500 swingarm somewhere through the mid 90s. If you put a later swingarm from a 500 on make sure you also use the corresponding linkage, then it will all work on your 250. Keep us posted on the build up.
Greg

Post a reply to: 1991 CR250R