1989 YZ125 clutch issues...

tommyo32
Profile picture for user tommyo32
Posts
7
Joined
8/29/2015
Location
Richmond, IL US
tommyo32
I bought a bike that was so called "ride/race ready" but you know how that goes. The clutch wont disengage all the way. I pull the lever in and put it in gear and it stalls. I adjusted it all the way out and in, new plates and fibers, 2 different levers, moved the actuating arm on the splines and none of makes a difference. My guess the little grooves in the basket is whats happening. I didn't think it was worn enough to matter. Any suggestions what else it may be?
|
pete24
Profile picture for user pete24
Posts
2733
Joined
10/20/2011
Location
Marlborough, MA US
pete24 6/14/2018 7:35pm
6/14/2018 7:35pm
its the outter cover when it gets old it flexes and theclutch doesnt disengage compltely i doubt there are new covers avaiable but thats your problem
tommyo32
Profile picture for user tommyo32
Posts
7
Joined
8/29/2015
Location
Richmond, IL US
tommyo32 6/14/2018 9:16pm
6/14/2018 9:16pm
pete24 wrote:
its the outter cover when it gets old it flexes and theclutch doesnt disengage compltely i doubt there are new covers avaiable but thats your problem
I was thinking that too... Do they warp? Flex?
Dekon
Profile picture for user Dekon
Posts
52
Joined
4/8/2017
Location
No. Prov., RI US
Dekon 6/15/2018 6:20am
6/15/2018 6:20am
I was told on here that the 1991 or 1992 covers will work better as the are made of aluminium and do not flex like the 89 and 90 magnesium cover does. I do know that the 93 cover does not work as the clutch pull rod is a smaller diameter.

The Shop

See All »
tommyo32
Profile picture for user tommyo32
Posts
7
Joined
8/29/2015
Location
Richmond, IL US
tommyo32 6/21/2018 8:13pm
6/21/2018 8:13pm
I found a 1992 cover and it totally fixed my issue!! Thanks for everyone's help!!

Post a reply to: 1989 YZ125 clutch issues...