Posts
256
Joined
8/8/2018
Location
Mukwonago, WI
US
Edited Date/Time
1/28/2019 7:43am
I had this posted in the forsale section also:
I got the bike a while ago from a friend and it is apparent that the bike was ridden very lightly. I took the bike down to the frame then sand blasted the frame/subframe and the exhaust (stock) all bearings were in very good shape so I cleaned and re greased them. The motor was completely cleaned and new gaskets were installed. The head has some mild porting.
I'm interested in any trades for newer bikes and I would be interested in small axle cone valves or 16+ trax shock.
I'm located near Milwaukee Wi
I got the bike a while ago from a friend and it is apparent that the bike was ridden very lightly. I took the bike down to the frame then sand blasted the frame/subframe and the exhaust (stock) all bearings were in very good shape so I cleaned and re greased them. The motor was completely cleaned and new gaskets were installed. The head has some mild porting.
I'm interested in any trades for newer bikes and I would be interested in small axle cone valves or 16+ trax shock.
I'm located near Milwaukee Wi
Post a reply to: 1989 CR250r (Milwaukee)