Thanks. I just received a factory manual in the mail (thanks ebay) and it is somewhat confusing. The manual says nothing about it being a left hand thread in the section discussing removal but on page 34 where it discusses installation it mentions that it is a left hand thread.
The Clymer manual I just received says it is left handed so I'll try that first and see if it breaks loose.
Thanks. I just received a factory manual in the mail (thanks ebay) and it is somewhat confusing. The manual says nothing about it being a left hand thread in the section discussing removal but on page 34 where it discusses installation it mentions that it is a left hand thread.
The Clymer manual I just received says it is left handed so I'll try that first and see if it breaks loose.
I read through your 88 RM250 build thread several times. Very nice job. Lots of good tips in there for me.
Post a reply to: 1988 RM250 Rebuild Primary Gear Question