1986 CR125 where do exhaust springs mount?

Brian_Bowles
Edited Date/Time 6/1/2020 11:17am
I have a 1986 CR125 without an ATAC. Where I attach the exhaust springs?
|
bad juju
Profile picture for user bad juju
Posts
508
Joined
12/15/2014
Location
Riverside, CA US
bad juju 5/25/2020 10:45am
5/25/2020 10:45am
pics pics pics. lets see what you got going on.
Brian_Bowles 5/25/2020 6:58pm
5/25/2020 6:58pm
Thanks. I put one spring on but it will not stay. There is nothing to mount it to that I can see.


Brian_Bowles 5/25/2020 6:59pm
5/25/2020 6:59pm
I do not know why the pictures turn sideways when I post them on here.
SmokinJoe439 5/26/2020 1:14pm
5/26/2020 1:14pm
The bolt on flange to the cylinder that does away with the atac chamber. Should have two small holes for the springs to hook into. I don't see any holes on your flange.

The Shop

See All »
Brian_Bowles 5/26/2020 2:41pm
5/26/2020 2:41pm
And of course that part is no longer available. I wonder if i had them when i took the bike apart? Maybe they fell off and i thought, "What the heck are these?". It does look like something that would be easy to make. I will look through my stuff to see if I have them in the parts bin. Thanks for the heads up.
Brian_Bowles 5/26/2020 5:14pm
5/26/2020 5:14pm
YOU ARE THE MAN!!! I looked through my parts drawer. I found the ziplock bag with the old gasket and bolts. Low and behold what was in there.

1
Brian_Bowles 5/26/2020 5:27pm
5/26/2020 5:27pm
I used the Honda OEM gasket. I should be able to just take two bolts out and mount these boys on. Of course I have to clean them up first on the buffer and repaint them. I have become OCD about stuff.

Post a reply to: 1986 CR125 where do exhaust springs mount?