1979 RM125 fork

inthebadboycorner
Hi,

I am installing Racetech emulators, floating piston and stiffer springs, I must also install the Racetech top out springs, which are stiffer and shorter.

Two pairs of top out springs come in the kit, do i put the shorter springs or the longer springs?

Thanks guys.
|
riv187
Profile picture for user riv187
Posts
527
Joined
2/1/2015
Location
Lakeland, FL US
riv187 6/15/2020 8:25am
6/15/2020 8:25am
Ask them,,,but I have purchased main spring kits and they came with the main springs &4 short springs that where stacked on top of the primary ones. If you stack 2 on top, you got a lower rate,1 higher, and none highest rate. The PVC spacer tube is cut to fit any of the 3 cases so you have about 4mm,, of preload.
inthebadboycorner 6/23/2020 11:20pm
6/23/2020 11:20pm Edited Date/Time 6/27/2020 1:15am
Update, I used the shorter pair of topout springs.
I also had to add 2mm washers extra to their supplied heavier rate main springs and oem spacers make the 6mm recommended preload.

Post a reply to: 1979 RM125 fork