Posts: 566
Joined: 1/9/2016
Location: NY, USA
I'm looking to get black front & side number plates for my 2017 YZ250F.
1. Will side number plates from Cycra or Acerbis physically fit to otherwise OEM plastics?
2. If they will fit, will that look off?
3. Also want to get blue or black fork guards. Do all aftermarkets blues match Yamaha pretty well? Which color should I go with?
Posts: 926
Joined: 8/14/2017
Location: Mountain Top, PA USA
Posts: 1011
Joined: 7/4/2013
Location: Antioch, CA USA
Posts: 566
Joined: 1/9/2016
Location: NY, USA
Posts: 2605
Joined: 7/22/2009
Location: CA, USA
Posts: 1330
Joined: 7/23/2013
Location: Farmville, NC USA
1. The Cycra will not work with OEM
3. Yes
2020 YZ450F
2018 KTM 450SXF FE
2016 YZ250F 2008 CRF450R
2015 YZ250F 2008 CRF250R
2001 CR250R
2010 YZ250 2012 CRF150R
2009 YZ125 2010 KX109.5
SSR Motorsports Dealer YCF Motorcycles
TAGMX Suspension & Graphics! www.tagmxsuspension.com https://www.liquidskinzdesign.com/
Posts: 51
Joined: 12/6/2016
Location: Parkton, NC USA
sgrimmxdad wrote:1. The Cycra will not work with OEM
3. Yes
This would not be correct when referencing the OP's question.
The cycra side/radiator shrouds will not work, however the side number plates from cycra are a direct replacement to OEM. The only difference is that the cycra side number plates are a one piece and the OEM is a two piece design that is riveted together.
Both blue and black fork guards will look good with the OEM plastics, whichever color you prefer to go with.
As seen below, I run the blue fork guards. Although my graphics are in two pieces on the number plate, the cycra number plate is one piece.
IG - @rwchaulk
Posts: 1330
Joined: 7/23/2013
Location: Farmville, NC USA
You are correct, I read the OP wrong...
2020 YZ450F
2018 KTM 450SXF FE
2016 YZ250F 2008 CRF450R
2015 YZ250F 2008 CRF250R
2001 CR250R
2010 YZ250 2012 CRF150R
2009 YZ125 2010 KX109.5
SSR Motorsports Dealer YCF Motorcycles
TAGMX Suspension & Graphics! www.tagmxsuspension.com https://www.liquidskinzdesign.com/
Posts: 566
Joined: 1/9/2016
Location: NY, USA
thanks, and thanks for the pics @4One7.
still pretty torn on black vs blue. leaning black but probably going to order both and make the call then.
Posts: 323
Joined: 4/1/2017
Location: Granbury, TX USA
Posts: 33888
Joined: 3/26/2015
Location: Ontario, CAN
Moderator
Posts: 80
Joined: 4/19/2015
Location: THA
Already posted in the guy that bought a YZF yesterday and was asking for plastic kits:
Rtech is great quality, mine is flashy but they have blue plastics too:
