YZ Tuner App help..

Superdave19
Profile picture for user Superdave19
Posts
1102
Joined
10/10/2012
Location
Spring, TX US
Superdave19
Edited Date/Time 8/23/2020 9:30am
Trying to download the TP 3.0 map... can connect, but the map settings on the app allow for 4 settings (65 60 40 20) in the App. The TP map calls for lower settings, which start at a lower value..going down to 5, which i don’t see..

Anyone have some guidance?

Thx!
|
Bennett59
Profile picture for user Bennett59
Posts
862
Joined
9/3/2015
Location
Bakersfield, CA US
Bennett59 8/22/2020 7:36pm
8/22/2020 7:36pm Edited Date/Time 8/22/2020 7:37pm
Superdave19 wrote:
Trying to download the TP 3.0 map... can connect, but the map settings on the app allow for 4 settings (65 60 40 20) in the...
Trying to download the TP 3.0 map... can connect, but the map settings on the app allow for 4 settings (65 60 40 20) in the App. The TP map calls for lower settings, which start at a lower value..going down to 5, which i don’t see..

Anyone have some guidance?

Thx!
Make sure the values on edges are changed also highlighted In yellow they can be changed manually as well
Superdave19
Profile picture for user Superdave19
Posts
1102
Joined
10/10/2012
Location
Spring, TX US
Superdave19 8/22/2020 8:10pm
8/22/2020 8:10pm
Bennett59 wrote:
Make sure the values on edges are changed also highlighted In yellow they can be changed manually as well [img]https://p.vitalmx.com/photos/forums/2020/08/22/445151/s1200_C8CDAD52_4FE8_4986_8C15_EE8F01A80FD4.jpg[/img]
Make sure the values on edges are changed also highlighted In yellow they can be changed manually as well
...Got it! Appreciate it greatly! ✊🏻
WheelieNelson 8/22/2020 9:21pm
8/22/2020 9:21pm
Bennett59 wrote:
Make sure the values on edges are changed also highlighted In yellow they can be changed manually as well [img]https://p.vitalmx.com/photos/forums/2020/08/22/445151/s1200_C8CDAD52_4FE8_4986_8C15_EE8F01A80FD4.jpg[/img]
Make sure the values on edges are changed also highlighted In yellow they can be changed manually as well
Damn you guys are smart haha. I didn’t even realize I had mine wrong I feel so dumb. Any idea what effect running the correct ratio will make, Ive actually been loving this map just complained there wasn’t as much bottom end I’m assuming this is why lol

1
Bennett59
Profile picture for user Bennett59
Posts
862
Joined
9/3/2015
Location
Bakersfield, CA US
Bennett59 8/22/2020 10:08pm
8/22/2020 10:08pm
Bennett59 wrote:
Make sure the values on edges are changed also highlighted In yellow they can be changed manually as well [img]https://p.vitalmx.com/photos/forums/2020/08/22/445151/s1200_C8CDAD52_4FE8_4986_8C15_EE8F01A80FD4.jpg[/img]
Make sure the values on edges are changed also highlighted In yellow they can be changed manually as well
WheelieNelson wrote:
Damn you guys are smart haha. I didn’t even realize I had mine wrong I feel so dumb. Any idea what effect running the correct ratio...
Damn you guys are smart haha. I didn’t even realize I had mine wrong I feel so dumb. Any idea what effect running the correct ratio will make, Ive actually been loving this map just complained there wasn’t as much bottom end I’m assuming this is why lol

Changes which part the rpm and % of throttle where it’s either goes lean or rich, then your timing. If the values are pretty different which looking at his and yours the bottom looks flatter so that’s probably why you feel like there is lack in it. I know on my 18 the tp 1.0 and 2.0 where better then stock, stock felt jerky where the tp felt like it gave a smoother power delivery through out. 2.0 had more aggressive hit.
1

The Shop

See All »
ajk423
Profile picture for user ajk423
Posts
150
Joined
7/24/2015
Location
Saint Louis, MO US
ajk423 8/23/2020 4:44am
8/23/2020 4:44am
Since that issue was resolved, I have a question if anyone knows. 2020yz250f won't send the maps to know. It just says "fails to send" and none of the "monitor" stuff works. Any suggestions? It connects and 1 time I could set 2 maps but I can't again
Timo_2824
Profile picture for user Timo_2824
Posts
553
Joined
12/19/2016
Location
Wichita, KS US
Timo_2824 8/23/2020 4:54am
8/23/2020 4:54am
ajk423 wrote:
Since that issue was resolved, I have a question if anyone knows. 2020yz250f won't send the maps to know. It just says "fails to send" and...
Since that issue was resolved, I have a question if anyone knows. 2020yz250f won't send the maps to know. It just says "fails to send" and none of the "monitor" stuff works. Any suggestions? It connects and 1 time I could set 2 maps but I can't again
Make sure you are turning your mobile data off before you connect. Mine would connect, but since it knows there wasn't any internet connection it would revert to using the mobile connection.
ajk423
Profile picture for user ajk423
Posts
150
Joined
7/24/2015
Location
Saint Louis, MO US
ajk423 8/23/2020 5:11am
8/23/2020 5:11am
ajk423 wrote:
Since that issue was resolved, I have a question if anyone knows. 2020yz250f won't send the maps to know. It just says "fails to send" and...
Since that issue was resolved, I have a question if anyone knows. 2020yz250f won't send the maps to know. It just says "fails to send" and none of the "monitor" stuff works. Any suggestions? It connects and 1 time I could set 2 maps but I can't again
Timo_2824 wrote:
Make sure you are turning your mobile data off before you connect. Mine would connect, but since it knows there wasn't any internet connection it would...
Make sure you are turning your mobile data off before you connect. Mine would connect, but since it knows there wasn't any internet connection it would revert to using the mobile connection.
Thanks I'll try that
Bennett59
Profile picture for user Bennett59
Posts
862
Joined
9/3/2015
Location
Bakersfield, CA US
Bennett59 8/23/2020 7:20am
8/23/2020 7:20am
ajk423 wrote:
Since that issue was resolved, I have a question if anyone knows. 2020yz250f won't send the maps to know. It just says "fails to send" and...
Since that issue was resolved, I have a question if anyone knows. 2020yz250f won't send the maps to know. It just says "fails to send" and none of the "monitor" stuff works. Any suggestions? It connects and 1 time I could set 2 maps but I can't again
Timo_2824 wrote:
Make sure you are turning your mobile data off before you connect. Mine would connect, but since it knows there wasn't any internet connection it would...
Make sure you are turning your mobile data off before you connect. Mine would connect, but since it knows there wasn't any internet connection it would revert to using the mobile connection.
ajk423 wrote:
Thanks I'll try that
I can’t remember a 100% but I think the bike has to be running to send the maps also. Last time I kept sending a map it would fail then I let it idle, hit send map and it worked
Timo_2824
Profile picture for user Timo_2824
Posts
553
Joined
12/19/2016
Location
Wichita, KS US
Timo_2824 8/23/2020 7:47am
8/23/2020 7:47am
Timo_2824 wrote:
Make sure you are turning your mobile data off before you connect. Mine would connect, but since it knows there wasn't any internet connection it would...
Make sure you are turning your mobile data off before you connect. Mine would connect, but since it knows there wasn't any internet connection it would revert to using the mobile connection.
ajk423 wrote:
Thanks I'll try that
Bennett59 wrote:
I can’t remember a 100% but I think the bike has to be running to send the maps also. Last time I kept sending a map...
I can’t remember a 100% but I think the bike has to be running to send the maps also. Last time I kept sending a map it would fail then I let it idle, hit send map and it worked
I send maps without the bike running 100% of the time, never even thought about doing it while it's running.
FranktheTank 8/23/2020 8:10am
8/23/2020 8:10am
Bike doesn't need to be running. Just hit the start button to wake it up, connect to the bikes wifi, and send map.

I might be alone in this but I find the stock slippery and hard pack maps ideal for 95% of tracks. I find it more tractable and bike seems to handle better, especially in the turns. The bonus is it won't tire you out as quickly. Try one of them with the tp and switch between laps. You might be suprised like I was.
Bennett59
Profile picture for user Bennett59
Posts
862
Joined
9/3/2015
Location
Bakersfield, CA US
Bennett59 8/23/2020 9:30am
8/23/2020 9:30am
ajk423 wrote:
Thanks I'll try that
Bennett59 wrote:
I can’t remember a 100% but I think the bike has to be running to send the maps also. Last time I kept sending a map...
I can’t remember a 100% but I think the bike has to be running to send the maps also. Last time I kept sending a map it would fail then I let it idle, hit send map and it worked
Timo_2824 wrote:
I send maps without the bike running 100% of the time, never even thought about doing it while it's running.
That’s how I thought I did mine was with it off, then another time while at the track I was helping this guy out with his and kept failing. So far the hell of it we let ideal and did it and worked
ajk423
Profile picture for user ajk423
Posts
150
Joined
7/24/2015
Location
Saint Louis, MO US
ajk423 8/23/2020 2:10pm
8/23/2020 2:10pm
ajk423 wrote:
Since that issue was resolved, I have a question if anyone knows. 2020yz250f won't send the maps to know. It just says "fails to send" and...
Since that issue was resolved, I have a question if anyone knows. 2020yz250f won't send the maps to know. It just says "fails to send" and none of the "monitor" stuff works. Any suggestions? It connects and 1 time I could set 2 maps but I can't again
Timo_2824 wrote:
Make sure you are turning your mobile data off before you connect. Mine would connect, but since it knows there wasn't any internet connection it would...
Make sure you are turning your mobile data off before you connect. Mine would connect, but since it knows there wasn't any internet connection it would revert to using the mobile connection.
ajk423 wrote:
Thanks I'll try that
Turning my data off seemed to worked, thanks again
1

Post a reply to: YZ Tuner App help..