Posts
16
Joined
9/5/2019
Location
CA
DK324
1/21/2021 11:21am
1/21/2021 11:21am
Edited Date/Time
1/20/2022 6:45am
Hey Guys,
I have just launched a new product called Tear off Gaskets! The purpose of the product is to stop water, mud and dirt from entering between the riders laminated stack. We guarantee that the gasket will never fail even in the worst conditions!
As a ex pro racer myself, I know the struggle of tossing your goggles mid moto because water or mud got behind my tear-off stack.
Please check it out over at https://tearoffgaskets.com/
You can give us a follow over @tearoff_gaskets on Instagram.
Check out Keefer's opinion here! Keefer Tested
I have just launched a new product called Tear off Gaskets! The purpose of the product is to stop water, mud and dirt from entering between the riders laminated stack. We guarantee that the gasket will never fail even in the worst conditions!
As a ex pro racer myself, I know the struggle of tossing your goggles mid moto because water or mud got behind my tear-off stack.
Please check it out over at https://tearoffgaskets.com/
You can give us a follow over @tearoff_gaskets on Instagram.
Check out Keefer's opinion here! Keefer Tested
The Shop
It is simple to remove and clean afterwards, and does not damage the lens in the process.
Some customers are using the gaskets for everyday sand riding to avoid scratching the laminated stack when sand inevitable gets behind the first tear off.
The gaskets have been tested against pressure washers, running water for 5mins+, cold temperatures, flexing( imitating roost). You name it!
And if I'm understanding it correctly, you'd place a gasket on the lens, then a stack of laminate tear-offs, followed by another gasket and then more tear-offs?
1. Peel adhesive backing
2. Place gasket onto the goggle lens
3. Apply laminated stack of tear-offs
4. Place gasket on top of laminate stack 1
5. Apply laminated stack #2 of tear-off's
6. Repeat steps 1-3
Due to the thickness of the gaskets & Tear off Stacks 3x 7 stacks (21 tear-offs) and 3 gaskets is the max thickness most goggle lens posts will allow!
I have used the Leatt Gasket on the Gox, it worked, but by no means do I advise on that fitment. I would suggest going with the Airbrake or Frontline gasket to use with your knew Lucid goggles!
@newmason - There is actually no additional litter when using Tear Off Gaskets. Our product splits in half when the final tear off is pulled....the top half sticks to the laminated tear off, and the bottom half would either stick to another tear off or the goggle lens. Additionally, our product has biodegradable properties. We understood that this would be a major issue and switched material a few times in the development process to ensure we ended up with a product that would be Eco-friendly.
Otherwise if the gasket stayed intact, you would have effectively glued the first tear off to your goggle lens.
Pit Row
CRF250Pilot- I agree, but these things take time! Logistically producing that design to be consistent, easy to mount while not leaving silicone gaskets all over the place are a few things business owners / product designers have to think about. Sometimes pure performance isn't the best route. HOWEVER! The patent I put into place covers a gasket of that design....... The future is bright.... I mean CLEAR.
Currently I am producing the Gaskets for
100% - Gen 1 & Armega
Oakley- Frontline, Airbrake, Mayhem
Fox- Vue, Airspace / Main
Leatt- Velocity
Scott- Prospect
100% Gen 2 & OG Optic's gaskets are being manufactured at the moment!
I also have plans to produce a "Universal" gasket that works for most goggles in the market! Fitment wont be as clean as precise but do to the wide range of Goggles in the market, this is a must!
Use the code "TEAROFFGASKETS" at checkout to save 15% at check out.
Tear Off Gaskets
That promo code has expired since posted.
Thank you! 🤙
Its a great product but when cost of shipping exceeds cost of your product that isn't a great business plan and never will be. their product can literally be placed into an envelope yet shipping is almost $13.00
Let's see your purchase receipt Craig..
Post a reply to: Tear Off Gaskets