Scalvini exhaust sighting at REM Saturday

The Rock
Profile picture for user The Rock
Posts
8763
Joined
3/21/2007
Location
HAIKU, HI US
The Rock
Edited Date/Time 3/30/2016 10:08am




First time I've seen a carbon end cap on a two stroke silencer....TRICK!



My friend and TM importer (and racer) Pete Vetrano is distributing these pipes in the US.

Pete's number is 909.608.0082 and Scalvini website

At the top of the page they show a wild dual outlet muffler like Yoshimura but I didn't have time to ferret out for what model it is for.
|
digger
Profile picture for user digger
Posts
737
Joined
4/1/2008
Location
Upstate, NY US
Fantasy
3883rd
digger 5/1/2012 4:02pm
5/1/2012 4:02pm
Now this is trick:

Bruce372
Profile picture for user Bruce372
Posts
6341
Joined
4/1/2008
Location
US
Bruce372 5/1/2012 4:25pm
5/1/2012 4:25pm
i thought 2-strokes were supposed to be cheap....neither of those parts looks inexpensive to me.
BAMX
Profile picture for user BAMX
Posts
2842
Joined
1/22/2012
Location
Fallbrook, CA US
BAMX 5/1/2012 4:29pm
5/1/2012 4:29pm
Bruce372 wrote:
i thought 2-strokes were supposed to be cheap....neither of those parts looks inexpensive to me.
I talked to him at Glen helen a month or so ago. I can't remember the exact price but it was comparable to PC and FMF. I think it was a little more but I don't remember sticker shock. They look super cool in person.
Bruce372
Profile picture for user Bruce372
Posts
6341
Joined
4/1/2008
Location
US
Bruce372 5/1/2012 4:42pm
5/1/2012 4:42pm
the cone pipes do look cool.

last time i was in the UK, i picked up a DEP system- they make a version especially for 144 bigbores; plus their silencer is quite long for Euro spec

The Shop

See All »
jathey
Profile picture for user jathey
Posts
329
Joined
4/1/2008
Location
MD US
jathey 5/1/2012 4:45pm
5/1/2012 4:45pm
I have this one on my RM250. SRS Racing from Italy. Carbon Fiber with machined (not stamped) aluminum end cap. I don't remember what I paid, but it wasn't too bad (less than $200).

I'm sure they're out there, but I've never seen another one.



Denn700
Profile picture for user Denn700
Posts
1257
Joined
11/7/2006
Location
Shreveport, LA US
Denn700 5/1/2012 4:56pm
5/1/2012 4:56pm
I have a Scalvini for my KTM 250 sx. It is a great pipe. It feels alot like the PC pipe. I prefer the fmf factory fatty though.
jathey
Profile picture for user jathey
Posts
329
Joined
4/1/2008
Location
MD US
jathey 5/1/2012 5:03pm
5/1/2012 5:03pm
Wow. I just went to their website. That stuff is unreal. Very trick and exotic - and not completely outrageou$.

Are SRS and Scalvini Racing related somehow?
mx757
Profile picture for user mx757
Posts
2276
Joined
4/1/2008
Location
Pueblo, CO US
mx757 5/1/2012 5:09pm
5/1/2012 5:09pm
That YZ pipe is beautiful. Too bad whoever owns it fails miserably at installing graphics
twosmoke30 5/1/2012 5:27pm
5/1/2012 5:27pm
Bruce372 wrote:
i thought 2-strokes were supposed to be cheap....neither of those parts looks inexpensive to me.
the whole system costs 5-600 bucks, that's not bad for a cone pipe and a carbon silencer, you can't touch a carbon/ti system on a 4 stroke for even close to that, heck you'd be lucky to get a full SS system for that on a 4
Paul333
Profile picture for user Paul333
Posts
1840
Joined
2/15/2012
Location
Virginia Beach, VA US
Paul333 5/1/2012 5:44pm
5/1/2012 5:44pm
That is one sweet as hell pipe.

I love it.
seth505
Profile picture for user seth505
Posts
9376
Joined
4/1/2008
Location
SD, CA US
Fantasy
1271st
seth505 5/1/2012 5:49pm
5/1/2012 5:49pm
I was thinking of getting that combo for my yz, looks trick. someone smashed my stock pipe so I got an FMF asap and now I just bent my silencer so I ordered a Leo Vince which is very nice as well and has carbon end cap similar to above.
The Rock
Profile picture for user The Rock
Posts
8763
Joined
3/21/2007
Location
HAIKU, HI US
The Rock 5/1/2012 11:35pm
5/1/2012 11:35pm
Bruce372 wrote:
i thought 2-strokes were supposed to be cheap....neither of those parts looks inexpensive to me.
BAMX wrote:
I talked to him at Glen helen a month or so ago. I can't remember the exact price but it was comparable to PC and FMF...
I talked to him at Glen helen a month or so ago. I can't remember the exact price but it was comparable to PC and FMF. I think it was a little more but I don't remember sticker shock. They look super cool in person.
June MXA shows

Pipe $279 (50cc to 144cc) $329 (250cc t0 300cc)

Silencer aluminum carbon $175
Silencer all carbon $225

Scalvini got four stars and this from MXA

This is a very good 125cc two stroke pipe, but most of all it fulfills the dream of having an old-school, cone pipe-just like the works bikes of the olden days.
Lightning78
Profile picture for user Lightning78
Posts
6314
Joined
12/12/2007
Location
Huntington Beach, CA US
Lightning78 5/2/2012 12:40am
5/2/2012 12:40am
Bruce372 wrote:
the cone pipes do look cool. last time i was in the UK, i picked up a DEP system- they make a version especially for 144...
the cone pipes do look cool.

last time i was in the UK, i picked up a DEP system- they make a version especially for 144 bigbores; plus their silencer is quite long for Euro spec

What footpegs do you have on the rm125? They look lower than stock..... I have the fastway ones even on the high setting and the have a slight tilt forward and I'm not liking them as much as I thought I would ..... HoweverI need some lower than stock pegs and judging from the tall seat im assuming youre a tall rider

Sorry if I hijacked just needed to know
PaleBlue
Profile picture for user PaleBlue
Posts
1533
Joined
6/16/2009
Location
Essex GB
PaleBlue 5/2/2012 1:34am
5/2/2012 1:34am
I've got these on both of my 2T TM's, because, while they are a little expensive, they're still cheaper than the OEM pipes (in the UK) and there is no other option!

Also got one the dual exit one on the TM250F - 'cos I love it! Wink
Bruce372
Profile picture for user Bruce372
Posts
6341
Joined
4/1/2008
Location
US
Bruce372 5/2/2012 5:48am
5/2/2012 5:48am
Bruce372 wrote:
i thought 2-strokes were supposed to be cheap....neither of those parts looks inexpensive to me.
BAMX wrote:
I talked to him at Glen helen a month or so ago. I can't remember the exact price but it was comparable to PC and FMF...
I talked to him at Glen helen a month or so ago. I can't remember the exact price but it was comparable to PC and FMF. I think it was a little more but I don't remember sticker shock. They look super cool in person.
The Rock wrote:
June MXA shows Pipe $279 (50cc to 144cc) $329 (250cc t0 300cc) Silencer aluminum carbon $175 Silencer all carbon $225 Scalvini got four stars and this...
June MXA shows

Pipe $279 (50cc to 144cc) $329 (250cc t0 300cc)

Silencer aluminum carbon $175
Silencer all carbon $225

Scalvini got four stars and this from MXA

This is a very good 125cc two stroke pipe, but most of all it fulfills the dream of having an old-school, cone pipe-just like the works bikes of the olden days.
thanks Rock- i stand corrected and sincerely apologize.....$280 is a decent price for a cool pipe like that.
Bruce372
Profile picture for user Bruce372
Posts
6341
Joined
4/1/2008
Location
US
Bruce372 5/2/2012 5:50am
5/2/2012 5:50am
Bruce372 wrote:
the cone pipes do look cool. last time i was in the UK, i picked up a DEP system- they make a version especially for 144...
the cone pipes do look cool.

last time i was in the UK, i picked up a DEP system- they make a version especially for 144 bigbores; plus their silencer is quite long for Euro spec

Lightning78 wrote:
What footpegs do you have on the rm125? They look lower than stock..... I have the fastway ones even on the high setting and the have...
What footpegs do you have on the rm125? They look lower than stock..... I have the fastway ones even on the high setting and the have a slight tilt forward and I'm not liking them as much as I thought I would ..... HoweverI need some lower than stock pegs and judging from the tall seat im assuming youre a tall rider

Sorry if I hijacked just needed to know
this could be you lucky day.....those pegs are actually moose offroad with the 12mm rear offset. i have a second set i took off my rm250, they are yours for $50 shipped.

aFACEdismembered 5/2/2012 7:23am
5/2/2012 7:23am
They also make a full kevlar silencer for a bit of extra support. Buying a cone pipe and kevlar or carbon silencer is still cheaper than just the exhaust for a 4 stroke. You could buy 2 sets for the price of one exhaust pipe.
TriRacer27
Profile picture for user TriRacer27
Posts
5449
Joined
2/7/2009
Location
Dallas, TX US
Fantasy
44th
TriRacer27 5/2/2012 7:27am
5/2/2012 7:27am
digger wrote:
Now this is trick: [img]http://www.scalviniracing.it/media/products/silenziatore-full-carbon-2t.jpg[/img]
Now this is trick:

That's nothing new. My dad used to have a carbon silencer on his '96 RM 250 from Bills Pipes. Except that one didn't have the carbon end cap like they do now.

Pit Row

See All »
chrisbuehler
Profile picture for user chrisbuehler
Posts
3350
Joined
2/9/2009
Location
North Stonington, CT US
chrisbuehler 5/2/2012 7:45am
5/2/2012 7:45am
digger wrote:
Now this is trick: [img]http://www.scalviniracing.it/media/products/silenziatore-full-carbon-2t.jpg[/img]
Now this is trick:

TriRacer27 wrote:
That's nothing new. My dad used to have a carbon silencer on his '96 RM 250 from Bills Pipes. Except that one didn't have the carbon...
That's nothing new. My dad used to have a carbon silencer on his '96 RM 250 from Bills Pipes. Except that one didn't have the carbon end cap like they do now.
Blast from the past Bill's Pipes. Allot of guys up in New England ran those back in the early 90's
Lightning78
Profile picture for user Lightning78
Posts
6314
Joined
12/12/2007
Location
Huntington Beach, CA US
Lightning78 5/2/2012 2:45pm
5/2/2012 2:45pm
Bruce372 wrote:
the cone pipes do look cool. last time i was in the UK, i picked up a DEP system- they make a version especially for 144...
the cone pipes do look cool.

last time i was in the UK, i picked up a DEP system- they make a version especially for 144 bigbores; plus their silencer is quite long for Euro spec

Lightning78 wrote:
What footpegs do you have on the rm125? They look lower than stock..... I have the fastway ones even on the high setting and the have...
What footpegs do you have on the rm125? They look lower than stock..... I have the fastway ones even on the high setting and the have a slight tilt forward and I'm not liking them as much as I thought I would ..... HoweverI need some lower than stock pegs and judging from the tall seat im assuming youre a tall rider

Sorry if I hijacked just needed to know
Bruce372 wrote:
this could be you lucky day.....those pegs are actually moose offroad with the 12mm rear offset. i have a second set i took off my rm250...
this could be you lucky day.....those pegs are actually moose offroad with the 12mm rear offset. i have a second set i took off my rm250, they are yours for $50 shipped.

Cool! Pm me your address and info and can we do it thru paypal? I may need to use a card.... Those are exactly what I'm looking for and this way I won't hook my rear brake going off the face of jumps .... Scary stuff ....the fastway are too close these are perfect!
Big
Profile picture for user Big
Posts
1008
Joined
10/18/2010
Location
SE
Big 5/2/2012 3:16pm
5/2/2012 3:16pm
Tried Scalvini on Honda 450 (tuned) Had to remove it. It shortened the register crazy much. (opposite what we wanted) PC, Acra and new FMF tops everything. (we tried a lot of pipes and doesn't work for magazine just prorider) Also HGS was really good but you can't add more weight than a complete ti-bolt kit takes off can you?
Digger29
Profile picture for user Digger29
Posts
1886
Joined
11/2/2011
Location
Oxford, MA US
Digger29 5/14/2012 3:11pm
5/14/2012 3:11pm
I just got one last week & used it yesterday at the races & I loved it. I also got the full carbon fiber silencer also.

seth505
Profile picture for user seth505
Posts
9376
Joined
4/1/2008
Location
SD, CA US
Fantasy
1271st
seth505 5/14/2012 4:38pm
5/14/2012 4:38pm
Digger29 wrote:
[IMG]http://img.photobucket.com/albums/v350/Diggermx29/Resampled_2012-05-11_20-24-58_866.jpg[/IMG]
SO sweet, was fitment good?
kyle450rider
Profile picture for user kyle450rider
Posts
149
Joined
11/26/2006
Location
Jenks, America, OK US
kyle450rider 5/14/2012 5:02pm
5/14/2012 5:02pm
Digger29 wrote:
[IMG]http://img.photobucket.com/albums/v350/Diggermx29/Resampled_2012-05-11_20-24-58_866.jpg[/IMG]
seth505 wrote:
SO sweet, was fitment good?
I don't post much on here but I had to log in for this picture. That pipe and silencer on the RM2fiddy looks great. Mind telling us what the combo cost? Ballpark????
bigmoto
Profile picture for user bigmoto
Posts
8
Joined
3/17/2012
Location
Philadelphia, PA US
bigmoto 5/14/2012 5:20pm
5/14/2012 5:20pm
Man that rm looks awesome! I love 2 strokes.
Digger29
Profile picture for user Digger29
Posts
1886
Joined
11/2/2011
Location
Oxford, MA US
Digger29 5/15/2012 6:32am
5/15/2012 6:32am
Thanks guys :-) the pipe fits awesome definitely worked great at the track on Sunday. The silencer fit great as well BUT was 17" long & went almost to the end of my fender & that was totally unacceptable :-) so I cut 9" of it & it barks now & isn't that loud at all. The crackle it has sounds like works 250 stroke on the track! The pipe was $350 & the full carbon silencer was very expensive at $350 especially seeing as I cut it basically it in half. You can get many verisons of the silencer to & get the cost down to around $200 also. Call Pete at Pete's Cycle & Sled & I'm sure he'll take care of you as he did me. 508 786 0888
FreshTopEnd
Profile picture for user FreshTopEnd
Posts
12476
Joined
8/16/2006
Location
Sacramento, CA US
Fantasy
4254th
FreshTopEnd 6/5/2012 2:22pm
6/5/2012 2:22pm
Anyone know off hand if you have to use the Scalvini silencer with their pipe?
dirtbikersa 6/5/2012 3:17pm
6/5/2012 3:17pm
FreshTopEnd wrote:
Anyone know off hand if you have to use the Scalvini silencer with their pipe?
Was wondering the same thing? Would love to get a new silencer but not complete pipe.

Post a reply to: Scalvini exhaust sighting at REM Saturday