Rm 250 miss third gear

Related:
Create New Tag

3/30/2018 7:21 PM

I have a rm 250 1996 third gear misses what tools do I need to change the whole transmission and do a rebuild on it?

|

3/30/2018 8:01 PM

A manual would be a great start, that will explain it all. It’s a job, and if you don’t have any experience at this, you’re in over your head.

|

3/30/2018 8:41 PM

The shift fork needs replacing. This was a problem with '96 RM250's. I've have one replaced years ago and vaugly remember it being around $800.00 parts and labor. I still have the bike and need it done again. At some point I plan to restore mine and dread spending that coin.

|

3/31/2018 6:20 AM

Did you take the motor out then take it to the shop or just take your whole bike to get worked on I was thinking just taking the motor it’s self in to save time for the mechanic

|

3/31/2018 6:42 AM

joerm250 wrote:

Did you take the motor out then take it to the shop or just take your whole bike to get worked on I was thinking just taking ...more

If you can't do it yourself the cost of a shop would be snuff to buy yourself a good bike.

|

3/31/2018 8:27 AM

joerm250 wrote:

Did you take the motor out then take it to the shop or just take your whole bike to get worked on I was thinking just taking ...more

I took the whole bike and let them handle it.

|

3/31/2018 9:20 AM

All you need is a hammer and a screwdriver. Take the engine out with the hammer and jam the screwdriver in between the cases and separate the cases. Replace shift fork and boom, you're done.

|

It's impossible for a corporation or government to love you or care about you.