Rm 125 2001 build RCH

Related:
Create New Tag

5/8/2016 2:59 PM

Hi

This is my first post on here, I have been busy the past 6 months building up a Rm 125 that i got off ebay. The bike was a complete wreck and needed a full build, all new bearings (motor too) powder coated frame / re anodized parts shock body fork stations/feet. Vapour blasted cases...the list is very long hence the time it has taken.Still a few things to do pc pipe boyesen clutch cover and a few other bits..not to much now before the getting it riding right. Photo

Photo

|

5/8/2016 3:11 PM

Photo

|

5/8/2016 3:20 PM

Tank is nice and shiny! Nice ride!

|

RIDEMPS.COM

[LINK TO IMAGE]

5/8/2016 3:21 PM

That tank has a little work in it. Very nice.

|

A big Thank you to FLY racing. OMA KTM. 100%. DT-1 Motorex and Bell helmets . Racing for you JG96

5/8/2016 3:23 PM
Edited Date/Time: 5/8/2016 3:25 PM

Thanks tiddlermx23 and OR Racer46 I will post some better pictures when the bike is done.

|

5/8/2016 3:27 PM

YES, please tell us some more about that tank!

|

Please use the comments to demonstrate your own ignorance, unfamiliarity with empirical data and lack of respect for scientific knowledge. Be sure to create straw men and argue against things I have neither said nor implied. If you could repeat previously discredited memes or steer the conversation into irrelevant, off topic discussions, it would be appreciated. Lastly, kindly forgo all civility in your discourse . . . you are, after all, anonymous. Checkout; ABetterStockMarket.com

5/8/2016 3:31 PM
Edited Date/Time: 5/8/2016 3:33 PM

They are made in Italy, made to rum rmz 450 plastics, made to fit Rm 125/250 01 up, xfun sell them. They fit very very well, no problems at all.

|

5/8/2016 3:31 PM

Nice looking scooter....

might want to flip your axle around on the rear. wink

|

5/8/2016 3:33 PM
Edited Date/Time: 5/8/2016 3:37 PM

fastraxx wrote:

They are made in Italy, made to rum rmz 450 plastics, made to fit Rm 125/250 01 up, xfun sell them. They fit very very well, no problems at all.

damn it !! Just when I thought I was done with my 250.... whistling

https://plus.google.com/collection/UH3LX

|

5/8/2016 3:36 PM

fastraxx wrote:

They are made in Italy, made to rum rmz 450 plastics, made to fit Rm 125/250 01 up, xfun sell them. They fit very very well, no problems at all.

langhammx wrote:

damn it !! Just when I thought I was done with my 250.... whistling

https://plus.google.com/collection/UH3LX

http://www.xfun.it/en/department/54/Aluminium-Fuel-Tank.html
They are never finish haha

|

5/8/2016 3:53 PM

So, what would it cost in US Dollars ? $530 in Italy = what $ in US Dollars ?

|

5/8/2016 4:48 PM

langhammx wrote:

So, what would it cost in US Dollars ? $530 in Italy = what $ in US Dollars ?

About $312 bucks

|

5/8/2016 6:15 PM

Nice!

|

5/8/2016 7:26 PM

WOW I DIND NO SUSZUKI MAKES A PURUPLE BACK FENDER WHATS THE KIND OF PIPE ON THIS I GOTS PRO CIRCUIT FOR SUSZUKI RM85 AND ALSO A VFORCE

|

suszuki rm85

5/8/2016 7:31 PM

Probably the nicest rm125 I've seen on here. And you're not even being cocky about it. Welcome to vital.

|

5/8/2016 8:15 PM

langhammx wrote:

So, what would it cost in US Dollars ? $530 in Italy = what $ in US Dollars ?

smv ryder wrote:

About $312 bucks

Damn... I thought it was more like $600. I see an aluminum tank in my future. cool

|

5/8/2016 8:18 PM
Edited Date/Time: 5/8/2016 8:22 PM

fastraxx wrote: Photo

is that the stock airbox/ side plates on your bike ?

|

5/8/2016 8:32 PM
Edited Date/Time: 5/8/2016 8:33 PM

fastraxx wrote:

They are made in Italy, made to rum rmz 450 plastics, made to fit Rm 125/250 01 up, xfun sell them. They fit very very well, no problems at all.

langhammx wrote:

damn it !! Just when I thought I was done with my 250.... whistling

https://plus.google.com/collection/UH3LX

Damn it! Shaun , I think we both just blew a big hole through our wallets! Never seen these on an RM 125/250 before.....uuhhgg! My bank account is killing me right now.

@Fasttraxx.....great " freaky " looking build there. Very nice!

|

And there goes Jeffro. One of God's own prototypes. A super high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.

Pimpin' Ho's , Rollin' fatty's......drinkin' beers , beers , beers!! ~ Ja

5/8/2016 8:39 PM

langhammx wrote:

So, what would it cost in US Dollars ? $530 in Italy = what $ in US Dollars ?

smv ryder wrote:

About $312 bucks

Ok , my heart just fell out of my chest and I damn near shred a tear. I just bought this new Clarke oem replacement tank like 1 month ago! God why didn't I see this before.

|

And there goes Jeffro. One of God's own prototypes. A super high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.

Pimpin' Ho's , Rollin' fatty's......drinkin' beers , beers , beers!! ~ Ja

5/8/2016 8:44 PM

Thank You for sharing this!! Looks great! I have been out of moto for 5 years, looks like that will be changing soon

|

5/8/2016 9:33 PM

Very nice ! The aluminum tank/shrouds takes the RM to a new level. RM owners, get your wallets out.

|

There's something happening here, what it is ain't exactly clear.

5/8/2016 9:37 PM

langhammx wrote:

So, what would it cost in US Dollars ? $530 in Italy = what $ in US Dollars ?

512 euro is 584 usd plus shipping

|

5/8/2016 11:57 PM

langhammx wrote:

So, what would it cost in US Dollars ? $530 in Italy = what $ in US Dollars ?

smv ryder wrote:

About $312 bucks

Would be $584 in US Dollars

|

5/9/2016 12:00 AM

fastraxx wrote: Photo

langhammx wrote:

is that the stock airbox/ side plates on your bike ?

2001 airbox but with mod side boards, i just copied the shape of the RMZ

|

5/9/2016 12:03 AM

Pete The Fisherman wrote:

Probably the nicest rm125 I've seen on here. And you're not even being cocky about it. Welcome to vital.

Thanks Pete The Fisherman

|

5/9/2016 2:21 AM

Really nice build, I'm a sucker for alloy tanks, my sidecar and solo both have them... Be careful that they are mounted correctly or they will split/crack/fracture although mine are on big bore bikes, you won't get the same vibration from a 125.

|

5/9/2016 2:43 AM

Nice work. what parts did you anodise?

|

Instagram @_yabba_dabba_dont_


5/9/2016 3:18 AM

Sidecar wrote:

Really nice build, I'm a sucker for alloy tanks, my sidecar and solo both have them... Be careful that they are mounted correctly or they will split/crack/fracture although mine are on big bore bikes, you won't get the same vibration from a 125.

Thanks Steveo I dig sidecars too.

|

5/9/2016 3:23 AM

Slosh 112 wrote:

Nice work. what parts did you anodise?

The list is long.
Fork stations
Fork feet
Triple clamps
Bar clamps
Outer clutch case
Water pump cover
Callipers
Powder valve cover
Linkage arm
Chain guide
Chain blocks....
I forget what I have done , just been doing bit by bit after work.

|

5/9/2016 6:52 AM

langhammx wrote:

So, what would it cost in US Dollars ? $530 in Italy = what $ in US Dollars ?

smv ryder wrote:

About $312 bucks

Just received an email back from them. $605 is the cost and $100 to ship it. I am going to have to pass on this one. Cool, but I just can't justify that kind of money for it.

|