Risk Racing -- lock and load system

Create New Tag

2/10/2018 2:27 PM

Is it a safe system ? Do you recommend it for a rough road ? (I'm afraid about frame damage with vibrations)

Thanks for your opinions !


2/10/2018 2:47 PM

Frame damage? Your bike is floating on the suspension. Have you see them doing donuts in the truck with the bike locked in the back?


2/10/2018 2:51 PM

I have 3 of them in my enclosed trailer, bikes don't move and don't have to mess with straps.


2/10/2018 2:56 PM
Edited Date/Time: 2/10/2018 2:56 PM

Used it on an open trailer for 2 years. No problem


If I'm healthy enough to complain. I shouldn't be complaining.

2/10/2018 3:05 PM
Edited Date/Time: 2/10/2018 3:07 PM

they're good. they cinch down on the peg, compressing both the front and rear suspension, and the teeth on your pegs really locks them in place.

they do not work (as designed) on some vintage bikes though. the pegs are either too low or the suspension isn't tall enough to compress, but you can still use it to hold the bike in place while it's strapped down, which means all you really need to do is hold the bars steady, you don't have to cinch it down tight. I really like them for this purpose as well.


2/10/2018 4:28 PM

They are really good.. hold secure and no damage to anything