Radiator Guards and Braces

Kayser618
Posts
34
Joined
12/23/2020
Location
Rockford, IL US
Happy Monday!

just curious whos running radiator guards and braces, and which ones to get and which ones to stay away from

looking for 2021 kx250

Please help!
Poll

Radiator Guards Do you run them?

Choices
|
msp332
Posts
241
Joined
10/29/2014
Location
San Mateo, CA US
7/26/2021 1:56pm
I don't. Only experience I've had damaging a radiator was when I hit an uprooted tree and bent the radiator back. A brace holding the radiator in place would have destroyed the radiator. I was able to bend it back and finish the day. Never needed to replace it.
2
7/26/2021 2:38pm Edited Date/Time 7/26/2021 2:39pm
Never bent a rad on my ktm but bent 3 on my 16 crf250r, some models seem to have this issue more then other, just to be safe you better use the brace, OEM radiator are not cheap.
1
Alabamagoon
Posts
35
Joined
5/19/2020
Location
Birmingham, AL US
7/26/2021 2:42pm
I run the works connection braces on my Yamaha 450 because someone told me the radiators bend easy.. and they look cool.
1
7/26/2021 3:33pm
I haven’t replaced a radiator in over 10 years since I started putting Work Connection braces on every bike I own. That is until last year when I got a new bike and the braces were on back order. That was expensive.
1

The Shop

Graybeard
Posts
1072
Joined
11/25/2013
Location
Athens, TX US
Fantasy
2310th
7/26/2021 4:05pm
Works Connection braces on both of my CRF450Rs.
1
7/26/2021 6:14pm
Works connection.

I have them on my 125, put them on my 2017 CRF 450 when I bought it new, then kept them for the 18-19-20. Never twisted a radiator.

Didn't buy a set for the 21 RWE, and yeah, I just completely destroyed the radiator this past weekend. I'm sure they would have been just fine if I had brace. Now it is basically too late to put a set on.

I won't ride my 2022 250 before I have a set on.
TeamGreen
Posts
28999
Joined
11/25/2008
Location
Thru-out, CA US
7/26/2021 6:16pm
I run them on my off-road bikes that have exposed radiators.
1
agn5008
Posts
1196
Joined
3/8/2021
Location
Saint Marys, PA US
Fantasy
317th
7/26/2021 7:58pm
I have bullet proof designs guards on my 22 300xc. They seem very good.
1
Hammer 663s
Posts
2321
Joined
6/2/2016
Location
Forest Grove, OR US
7/26/2021 8:01pm
I’ve run WC braces in the past. Made no difference when I got slammed in the first turn. Brace folded, rad folder, I folded. Happened twice. Haven’t run one since and haven’t lost a rad to damage. maybe they were magnets?

Hammer 663s
1
CPR
Posts
4373
Joined
10/4/2018
Location
AU
7/27/2021 3:02am
My experience: good for reducing damage from small tip overs, but seem to exacerbate damage in big hits.
wrc777
Posts
2204
Joined
5/21/2020
Location
Greenwood, IN US
Fantasy
783rd
7/27/2021 5:02am
CPR wrote:
My experience: good for reducing damage from small tip overs, but seem to exacerbate damage in big hits.
Same here. Makes is harder to get the rad back straight enough to ride too.
jpatz319
Posts
223
Joined
3/24/2015
Location
Statesville, NC US
Fantasy
1145th
7/27/2021 6:19am
You are better off sending your rads to ICW and getting them braced up. Way stronger than the WC braces.
JBecker 72
Posts
1738
Joined
3/25/2014
Location
VA US
7/27/2021 6:26am
I just ordered a set of GYTR radiator braces for my YZ250F this morning. I’ve had WC on my last couple bikes but these look like they fit a lot nicer.

Post a reply to: Radiator Guards and Braces

The Latest