Create New Tag

6/29/2010 7:17 PM

I just bought a 2010 ssr 110cc dx, im wondering how to break it in, im going to let it sit through a tank of gas, then take it easy through the gears the first day, but is their anything else I should do? thanks


6/29/2010 9:13 PM



6/29/2010 9:16 PM

Check here:


6/30/2010 5:48 PM

they didnt say anything, what should i do or can i just hop on it and ride it slow and easy


6/30/2010 6:05 PM

During the break in period try to vary the engine speed as much as possible. This isn't particularly easy since they tend to try to keep the revs pretty constant and change speed by changing the gear ratio. It is good to speed up and slow down and not ride at a constant throttle setting for long periods. Also avoid rapid starts and let the engine warm up for about a minute before moving off when you first start the scooter from cold to allow the oil to circulate. This is good advice even after the initial break-in period too.


Bone or bail i got to race
It,s all about stayen on the box!
All these dudes think ya have a problem but the true problem is everyone else. Motocrossers are uptite family people!

6/30/2010 8:31 PM

Also, get a tube of blue Loctite and put it on every nut and bolt on the bike.