Ok so

Related:
Create New Tag

11/27/2020 1:13 PM

How do they put a new bearing into a carter?
Do they make it hot? Or pressing it with a hammer?
18yo curious.
I ride since when i'm 8 but never really had the chanche to do more than a couple top ends with my dad

|

11/27/2020 1:47 PM

Something got lost in translation. "carter" is not right. Maybe you mean case, wheel hub, or im not really sure.

|

11/27/2020 1:53 PM
Edited Date/Time: 11/27/2020 1:54 PM

Hot tip: finish writing your topic for more clicks, your not charged per characterermm

|

11/27/2020 2:16 PM

FYI yall OP's native language aint English.

Yes heat up the case and drop the bearing in. Might have to give it a tap with a hammer.

|

11/27/2020 2:18 PM

colintrax wrote:

FYI yall OP's native language aint English.

Yes heat up the case and drop the bearing in. Might have to give it a tap with a ...more

Thank you pal!😉
Yeah, i meant case and not carter ahahah
Thank you anyway

|

11/27/2020 2:23 PM
Edited Date/Time: 11/27/2020 2:24 PM

Yes, with a thermal cleaner (pulitore termico)

That may help too:
https://www.youtube.com/results?search_query=yz125+bottom+end+rebuild

But be very careful when re assembling the gear box, it is tricky. Good luck.

|

11/27/2020 3:02 PM

Bearing in the deep-freeze bro.

|

11/27/2020 6:04 PM

Always lubricate the housing bore and the O.D. Of the bearing.

KC

|

11/27/2020 8:57 PM

LKHill wrote:

Bearing in the deep-freeze bro.

X2, freezing helps in any situation like this. Put it in a cooler of dry ice overnight, you will be shocked at how well it works.

|

11/27/2020 9:31 PM

Bearing in the freezer and case in the oven at 200 for 10 minutes.

|

11/28/2020 3:09 AM

Thank you guys. Not doing it now but in about 30 hours. My sx 250 2019 is now at 70 hours

|