New 110

GouldRacing25
Profile picture for user GouldRacing25
Posts
406
Joined
10/20/2014
Location
INLAND EMPIRE, CA US
Fantasy
1681st
GouldRacing25 5/2/2020 11:22pm
5/2/2020 11:22pm
GouldRacing25 wrote:
This is my ultimate pit bike [img]https://p.vitalmx.com/photos/forums/2020/05/02/424982/s1200_1AAAA06A_A982_4492_ABE4_B79335A914B7.jpg[/img] Motor is a Daytona 190 with 2mm crank = 212 big bore kit. Came straight from Daytona anima in...
This is my ultimate pit bike


Motor is a Daytona 190 with 2mm crank = 212 big bore kit. Came straight from Daytona anima in Japan.

Has Daytona’s race Cdi adjustable timing and rev limiter. Over sized oil cooler that is vertically mounted with braided steel lines. 30mm pkw Keihin carb and a uni twin stage filter with skin cover water proof.

The frame is copied from a piranhas frame, built a jig from it but fixed some of the geometry angles on head set and lengthen the frame. Wrinkle powder coating done on the frame.

Fast ace forks with factory connection 47nm springs, Dnm race shock 700lb spring with Shock wears shock cover.

2009 Crf450r front brakes, 2007 Yz450f rear master brake, 2001 cr80 caliper and steel braided lines front and rear.

Hand made stainless exhaust with fmf 2.1 power core muffler

Piranha race wheels

Piranha swing arm mod to cr brakes as well cr pivot bearings

Head set bearings are crf110

Pro taper bars

2018 yz65 oem plastics seat tank and all bolts on to bike like factory model hand made.
xrmark wrote:
4500 bucks takes it hes in orange county. You deleted that part out when you copy and pasted his post off the plante minis FB page.
That is my post haha
xrmark
Profile picture for user xrmark
Posts
1123
Joined
9/9/2019
Location
Lake Elsinore, CA US
xrmark 5/2/2020 11:36pm
5/2/2020 11:36pm
GouldRacing25 wrote:
This is my ultimate pit bike [img]https://p.vitalmx.com/photos/forums/2020/05/02/424982/s1200_1AAAA06A_A982_4492_ABE4_B79335A914B7.jpg[/img] Motor is a Daytona 190 with 2mm crank = 212 big bore kit. Came straight from Daytona anima in...
This is my ultimate pit bike


Motor is a Daytona 190 with 2mm crank = 212 big bore kit. Came straight from Daytona anima in Japan.

Has Daytona’s race Cdi adjustable timing and rev limiter. Over sized oil cooler that is vertically mounted with braided steel lines. 30mm pkw Keihin carb and a uni twin stage filter with skin cover water proof.

The frame is copied from a piranhas frame, built a jig from it but fixed some of the geometry angles on head set and lengthen the frame. Wrinkle powder coating done on the frame.

Fast ace forks with factory connection 47nm springs, Dnm race shock 700lb spring with Shock wears shock cover.

2009 Crf450r front brakes, 2007 Yz450f rear master brake, 2001 cr80 caliper and steel braided lines front and rear.

Hand made stainless exhaust with fmf 2.1 power core muffler

Piranha race wheels

Piranha swing arm mod to cr brakes as well cr pivot bearings

Head set bearings are crf110

Pro taper bars

2018 yz65 oem plastics seat tank and all bolts on to bike like factory model hand made.
xrmark wrote:
4500 bucks takes it hes in orange county. You deleted that part out when you copy and pasted his post off the plante minis FB page.
GouldRacing25 wrote:
That is my post haha
well shit call me stupid haha
GouldRacing25
Profile picture for user GouldRacing25
Posts
406
Joined
10/20/2014
Location
INLAND EMPIRE, CA US
Fantasy
1681st
GouldRacing25 5/2/2020 11:39pm
5/2/2020 11:39pm
xrmark wrote:
4500 bucks takes it hes in orange county. You deleted that part out when you copy and pasted his post off the plante minis FB page.
GouldRacing25 wrote:
That is my post haha
xrmark wrote:
well shit call me stupid haha
Lol it’s all good. I can see where it looks like I’m wishing it was mine. Lucky for me it is haha. For now anyways
Motofinne
Profile picture for user Motofinne
Posts
10691
Joined
1/4/2014
Location
FI
Motofinne 5/3/2020 12:58am
5/3/2020 12:58am
That might be the sickest pit bike i have ever seen, what a build!

The Shop

See All »
nine1seven
Profile picture for user nine1seven
Posts
370
Joined
9/13/2009
Location
Magnolia, TX US
nine1seven 5/3/2020 3:54pm
5/3/2020 3:54pm
Hoks wrote:
[img]https://p.vitalmx.com/photos/forums/2020/03/26/413440/s1200_E1708396_E427_4C9D_A810_7DDC4627AEBF.jpg[/img]

nine1seven wrote:
Question for you guys mounting higher bars on your CRF110s - what longer cables are you using? CRF125? What about full size throttle tubes?
Brap! wrote:
If you are just adding taller bars, you can turn your throttle housing upside down and be fine, or reroute the cables through the frame. When...
If you are just adding taller bars, you can turn your throttle housing upside down and be fine, or reroute the cables through the frame. When you go to adding fork springs and dampening rods, lifting the front end 1.5 inches plus, you’ll need crf125 throttle cables. You can also run the crf125 throttle tube to use full size grips.
Does the CRF 125 throttle tube bolt straight up with no issues? Does it have that groove for the cables on the cam? I see people are buying motion pro throttle tubes and then grinding that groove into the cam. I assume you’d have to do that on the CRF 125 throttle tube? Can anyone verify?
xrmark
Profile picture for user xrmark
Posts
1123
Joined
9/9/2019
Location
Lake Elsinore, CA US
xrmark 5/3/2020 5:01pm
5/3/2020 5:01pm
Picked up this 07 stocker on Friday. Threw a tall seat, TAG top clamp, black front plate and front fender. 800 bucks!



2
GouldRacing25
Profile picture for user GouldRacing25
Posts
406
Joined
10/20/2014
Location
INLAND EMPIRE, CA US
Fantasy
1681st
GouldRacing25 5/3/2020 5:17pm
5/3/2020 5:17pm
xrmark wrote:
Picked up this 07 stocker on Friday. Threw a tall seat, TAG top clamp, black front plate and front fender. 800 bucks! [img]https://p.vitalmx.com/photos/forums/2020/05/03/425131/s1200_image2_1.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2020/05/03/425130/s1200_image1_2.jpg[/img]
Picked up this 07 stocker on Friday. Threw a tall seat, TAG top clamp, black front plate and front fender. 800 bucks!



That’s a good find!
tk2stroke
Profile picture for user tk2stroke
Posts
262
Joined
6/8/2016
Location
Park City, UT US
tk2stroke 5/3/2020 6:13pm
5/3/2020 6:13pm
xrmark wrote:
Picked up this 07 stocker on Friday. Threw a tall seat, TAG top clamp, black front plate and front fender. 800 bucks! [img]https://p.vitalmx.com/photos/forums/2020/05/03/425131/s1200_image2_1.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2020/05/03/425130/s1200_image1_2.jpg[/img]
Picked up this 07 stocker on Friday. Threw a tall seat, TAG top clamp, black front plate and front fender. 800 bucks!



Total steal, that would sell for $1400-$1600 in Utah
mx 219
Profile picture for user mx 219
Posts
3720
Joined
8/15/2010
Location
South Central, PA US
Fantasy
857th
mx 219 5/4/2020 5:37am
5/4/2020 5:37am
xrmark wrote:
Picked up this 07 stocker on Friday. Threw a tall seat, TAG top clamp, black front plate and front fender. 800 bucks! [img]https://p.vitalmx.com/photos/forums/2020/05/03/425131/s1200_image2_1.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2020/05/03/425130/s1200_image1_2.jpg[/img]
Picked up this 07 stocker on Friday. Threw a tall seat, TAG top clamp, black front plate and front fender. 800 bucks!



tk2stroke wrote:
Total steal, that would sell for $1400-$1600 in Utah
An '07 shouldn't go that high anywhere in the country. I would think you can get a 2011-2014 for 1400-1600.

He got a good price, but realistically an 07 shouldn't sell for much more than $1000, maybe $1100.
moto314
Profile picture for user moto314
Posts
892
Joined
10/20/2009
Location
Mooresville, NC US
moto314 5/4/2020 6:44am
5/4/2020 6:44am
nine1seven wrote:
Question for you guys mounting higher bars on your CRF110s - what longer cables are you using? CRF125? What about full size throttle tubes?
Brap! wrote:
If you are just adding taller bars, you can turn your throttle housing upside down and be fine, or reroute the cables through the frame. When...
If you are just adding taller bars, you can turn your throttle housing upside down and be fine, or reroute the cables through the frame. When you go to adding fork springs and dampening rods, lifting the front end 1.5 inches plus, you’ll need crf125 throttle cables. You can also run the crf125 throttle tube to use full size grips.
nine1seven wrote:
Does the CRF 125 throttle tube bolt straight up with no issues? Does it have that groove for the cables on the cam? I see people...
Does the CRF 125 throttle tube bolt straight up with no issues? Does it have that groove for the cables on the cam? I see people are buying motion pro throttle tubes and then grinding that groove into the cam. I assume you’d have to do that on the CRF 125 throttle tube? Can anyone verify?
The CRF125 tube has the groove, but if you want to use aftermarket grips you have to grid all the nobbies off the tube.
tk2stroke
Profile picture for user tk2stroke
Posts
262
Joined
6/8/2016
Location
Park City, UT US
tk2stroke 5/4/2020 7:12am
5/4/2020 7:12am
xrmark wrote:
Picked up this 07 stocker on Friday. Threw a tall seat, TAG top clamp, black front plate and front fender. 800 bucks! [img]https://p.vitalmx.com/photos/forums/2020/05/03/425131/s1200_image2_1.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2020/05/03/425130/s1200_image1_2.jpg[/img]
Picked up this 07 stocker on Friday. Threw a tall seat, TAG top clamp, black front plate and front fender. 800 bucks!



tk2stroke wrote:
Total steal, that would sell for $1400-$1600 in Utah
mx 219 wrote:
An '07 shouldn't go that high anywhere in the country. I would think you can get a 2011-2014 for 1400-1600. He got a good price, but...
An '07 shouldn't go that high anywhere in the country. I would think you can get a 2011-2014 for 1400-1600.

He got a good price, but realistically an 07 shouldn't sell for much more than $1000, maybe $1100.
Shouldn't? The market is the market and it decides the value. I will say a 3 speed 07 KLX may go for a bit less than 14-1600 but my 08 TTR would fetch $1400 and sell within a hour if I posted it. The 110's are wildly in demand and can hardly be found and sell literally within minutes. My friend group has been tracking and purchasing 110's for the past several months and the market demand is crazy
1
mx 219
Profile picture for user mx 219
Posts
3720
Joined
8/15/2010
Location
South Central, PA US
Fantasy
857th
mx 219 5/4/2020 8:20am
5/4/2020 8:20am
tk2stroke wrote:
Total steal, that would sell for $1400-$1600 in Utah
mx 219 wrote:
An '07 shouldn't go that high anywhere in the country. I would think you can get a 2011-2014 for 1400-1600. He got a good price, but...
An '07 shouldn't go that high anywhere in the country. I would think you can get a 2011-2014 for 1400-1600.

He got a good price, but realistically an 07 shouldn't sell for much more than $1000, maybe $1100.
tk2stroke wrote:
Shouldn't? The market is the market and it decides the value. I will say a 3 speed 07 KLX may go for a bit less than...
Shouldn't? The market is the market and it decides the value. I will say a 3 speed 07 KLX may go for a bit less than 14-1600 but my 08 TTR would fetch $1400 and sell within a hour if I posted it. The 110's are wildly in demand and can hardly be found and sell literally within minutes. My friend group has been tracking and purchasing 110's for the past several months and the market demand is crazy
I have also purchased around 30 110 bikes from around the country, so I have a little insight into the market as well. I have bought pitbikes for $600-3500.
tk2stroke
Profile picture for user tk2stroke
Posts
262
Joined
6/8/2016
Location
Park City, UT US
tk2stroke 5/4/2020 8:27am
5/4/2020 8:27am
mx 219 wrote:
An '07 shouldn't go that high anywhere in the country. I would think you can get a 2011-2014 for 1400-1600. He got a good price, but...
An '07 shouldn't go that high anywhere in the country. I would think you can get a 2011-2014 for 1400-1600.

He got a good price, but realistically an 07 shouldn't sell for much more than $1000, maybe $1100.
tk2stroke wrote:
Shouldn't? The market is the market and it decides the value. I will say a 3 speed 07 KLX may go for a bit less than...
Shouldn't? The market is the market and it decides the value. I will say a 3 speed 07 KLX may go for a bit less than 14-1600 but my 08 TTR would fetch $1400 and sell within a hour if I posted it. The 110's are wildly in demand and can hardly be found and sell literally within minutes. My friend group has been tracking and purchasing 110's for the past several months and the market demand is crazy
mx 219 wrote:
I have also purchased around 30 110 bikes from around the country, so I have a little insight into the market as well. I have bought...
I have also purchased around 30 110 bikes from around the country, so I have a little insight into the market as well. I have bought pitbikes for $600-3500.
Well you tried to tell me it "shouldn't" go for that much and I'm simply informing you that the market it Utah as of Spring 2020 supports that price range.
slipdog
Profile picture for user slipdog
Posts
10044
Joined
7/25/2009
Location
Nor Cal, CA US
slipdog 5/4/2020 3:38pm
5/4/2020 3:38pm
Working on this project for my 8yr old and got it kid sized today Just waiting on larger quiet core muffler, graphics, and custom-wound spring rates and we'll be good to go.




3
ButteryWaffles 5/6/2020 4:57pm
5/6/2020 4:57pm
Anyone run the 110 bend from ODI? Still can’t decide if I want the 50 bend or 110 bend.
motoarmageddon 5/6/2020 10:08pm
5/6/2020 10:08pm
do you realize that 110s are a big ass fad like Harleys were after sons of anarchy? Im not joking. This dork i know sold his lameass harley that he only bought because of twitchs videos and bought a new klx110 because ... of twitchs videos. Is that lame?
19
ButteryWaffles 5/7/2020 6:55am
5/7/2020 6:55am
motoarmageddon wrote:
do you realize that 110s are a big ass fad like Harleys were after sons of anarchy? Im not joking. This dork i know sold his...
do you realize that 110s are a big ass fad like Harleys were after sons of anarchy? Im not joking. This dork i know sold his lameass harley that he only bought because of twitchs videos and bought a new klx110 because ... of twitchs videos. Is that lame?
Cool story bro. Tell it again.

I was into pitbikes when we were on 125’s back In 2003 and still had our 98 XR70. Just happened to pick one up this year after years of wanting another bike.
4

Pit Row

See All »
Dirty Points 5/7/2020 7:04am
5/7/2020 7:04am
motoarmageddon wrote:
do you realize that 110s are a big ass fad like Harleys were after sons of anarchy? Im not joking. This dork i know sold his...
do you realize that 110s are a big ass fad like Harleys were after sons of anarchy? Im not joking. This dork i know sold his lameass harley that he only bought because of twitchs videos and bought a new klx110 because ... of twitchs videos. Is that lame?
ButteryWaffles wrote:
Cool story bro. Tell it again. I was into pitbikes when we were on 125’s back In 2003 and still had our 98 XR70. Just happened...
Cool story bro. Tell it again.

I was into pitbikes when we were on 125’s back In 2003 and still had our 98 XR70. Just happened to pick one up this year after years of wanting another bike.
Nah man

Oldest motorcycle manufacturer in the world: fad.
Pit bikes, roaming the pits since the late 60s: fad.
Butter on toast: fad.
Pants: fad.
FortyHat
Profile picture for user FortyHat
Posts
345
Joined
5/16/2017
Location
CO US
FortyHat 5/7/2020 8:47am
5/7/2020 8:47am
motoarmageddon wrote:
do you realize that 110s are a big ass fad like Harleys were after sons of anarchy? Im not joking. This dork i know sold his...
do you realize that 110s are a big ass fad like Harleys were after sons of anarchy? Im not joking. This dork i know sold his lameass harley that he only bought because of twitchs videos and bought a new klx110 because ... of twitchs videos. Is that lame?
I fail to see how people spending of money in the dirt bike industry is lame in any way, but that's just me. If it's a fad, we need more of them.
2
xrmark
Profile picture for user xrmark
Posts
1123
Joined
9/9/2019
Location
Lake Elsinore, CA US
xrmark 5/7/2020 12:41pm
5/7/2020 12:41pm
motoarmageddon wrote:
do you realize that 110s are a big ass fad like Harleys were after sons of anarchy? Im not joking. This dork i know sold his...
do you realize that 110s are a big ass fad like Harleys were after sons of anarchy? Im not joking. This dork i know sold his lameass harley that he only bought because of twitchs videos and bought a new klx110 because ... of twitchs videos. Is that lame?
If they were a big ass fad they wouldn't make them. idk about you but the majority of people buying and riding these things are adults. Pit bikes have been a thing forever. You just sound jealous of your friend. Your friend watched a twitch video and saw dudes having an absolute blast on pit bikes, so it encouraged him to go buy one. I fail to understand why you think that is lame. You sir, sound like the lame ass.
Brap!
Profile picture for user Brap!
Posts
83
Joined
9/16/2008
Location
Campbellsville, KY US
Brap! 5/8/2020 10:08am
5/8/2020 10:08am
motoarmageddon wrote:
do you realize that 110s are a big ass fad like Harleys were after sons of anarchy? Im not joking. This dork i know sold his...
do you realize that 110s are a big ass fad like Harleys were after sons of anarchy? Im not joking. This dork i know sold his lameass harley that he only bought because of twitchs videos and bought a new klx110 because ... of twitchs videos. Is that lame?
What a stupid comment to make. Pit bikes have been a thing for years. You must be a super serious guy. I bet you have A-kit suspension on your new 450 that you race the C class with. You are the male equivalent of a Karen.
1
IhazyI
Profile picture for user IhazyI
Posts
36
Joined
5/20/2017
Location
Chippewa Falls, WI US
IhazyI 5/8/2020 10:20am
5/8/2020 10:20am
tk2stroke wrote:
The Pro Taper Mini SE bar XR/CRF50 bend is perfect for 110 pit bikes. Get it and live happily ever after

https://www.faster-minis.com/collections/ttr110/products/handlebar-prot…

ButteryWaffles wrote:
Just ordered a set 🤘🏼
If you ordered off of Faster-minis. Go back and make sure you picked the CRF50 (sold out) and not the KLX that it auto fills with. I almost made that mistake. It is about a 28mm height difference.
Black Diesel Bomber 5/8/2020 10:24am
5/8/2020 10:24am
GouldRacing25 wrote:
This is my ultimate pit bike [img]https://p.vitalmx.com/photos/forums/2020/05/02/424982/s1200_1AAAA06A_A982_4492_ABE4_B79335A914B7.jpg[/img] Motor is a Daytona 190 with 2mm crank = 212 big bore kit. Came straight from Daytona anima in...
This is my ultimate pit bike


Motor is a Daytona 190 with 2mm crank = 212 big bore kit. Came straight from Daytona anima in Japan.

Has Daytona’s race Cdi adjustable timing and rev limiter. Over sized oil cooler that is vertically mounted with braided steel lines. 30mm pkw Keihin carb and a uni twin stage filter with skin cover water proof.

The frame is copied from a piranhas frame, built a jig from it but fixed some of the geometry angles on head set and lengthen the frame. Wrinkle powder coating done on the frame.

Fast ace forks with factory connection 47nm springs, Dnm race shock 700lb spring with Shock wears shock cover.

2009 Crf450r front brakes, 2007 Yz450f rear master brake, 2001 cr80 caliper and steel braided lines front and rear.

Hand made stainless exhaust with fmf 2.1 power core muffler

Piranha race wheels

Piranha swing arm mod to cr brakes as well cr pivot bearings

Head set bearings are crf110

Pro taper bars

2018 yz65 oem plastics seat tank and all bolts on to bike like factory model hand made.
xrmark wrote:
4500 bucks takes it hes in orange county. You deleted that part out when you copy and pasted his post off the plante minis FB page.
GouldRacing25 wrote:
That is my post haha
I want one...are you going to make more of them?
TeamGreen
Profile picture for user TeamGreen
Posts
29082
Joined
11/25/2008
Location
Thru-out, CA US
TeamGreen 5/8/2020 11:14am
5/8/2020 11:14am
slipdog wrote:
Working on this project for my 8yr old and got it kid sized today Just waiting on larger quiet core muffler, graphics, and custom-wound spring rates...
Working on this project for my 8yr old and got it kid sized today Just waiting on larger quiet core muffler, graphics, and custom-wound spring rates and we'll be good to go.




Yo, suspension guru of the north:

Is it easier to ride, for him...as it appears to be in the pics I've seen?
slipdog
Profile picture for user slipdog
Posts
10044
Joined
7/25/2009
Location
Nor Cal, CA US
slipdog 5/8/2020 12:42pm
5/8/2020 12:42pm
slipdog wrote:
Working on this project for my 8yr old and got it kid sized today Just waiting on larger quiet core muffler, graphics, and custom-wound spring rates...
Working on this project for my 8yr old and got it kid sized today Just waiting on larger quiet core muffler, graphics, and custom-wound spring rates and we'll be good to go.




TeamGreen wrote:
Yo, suspension guru of the north:

Is it easier to ride, for him...as it appears to be in the pics I've seen?
Yes, it's a 4-stroke. He hasn't given up on moving from the KX65 to a YZ65 since he rode his friends last week but when I get the springs and dial in the suspension I suspect he'll change his mind.

I already text the local promoter and he said when the races start back up he can run it in the 65 beginner class but I suspect there'll be some little league parents complaining because it's not a 65. There are no written rules for 4-strokes in the 65 class so we'll run it since the promoter says it's ok.
ButteryWaffles 5/8/2020 1:16pm
5/8/2020 1:16pm
IhazyI wrote:
If you ordered off of Faster-minis. Go back and make sure you picked the CRF50 (sold out) and not the KLX that it auto fills with...
If you ordered off of Faster-minis. Go back and make sure you picked the CRF50 (sold out) and not the KLX that it auto fills with. I almost made that mistake. It is about a 28mm height difference.
I actually found a set on eBay for a few bucks cheaper. Thanks for the heads up though! I triple checked my order on eBay as well.
1

Post a reply to: New 110