Posts
1399
Joined
9/28/2011
Location
Maybell, CO
US
Edited Date/Time
4/2/2012 5:44pm
Today I bought a 2001 CR250R sight unseen from a guy unknown, I figure how bad could it be for $350 right? All I know about it is that it quit running after he heard some loud noises HAHA "Been there before". Well when I get home tonight im going to go pick it up and post pics. Access the situation and come to my Vital family to concur if its worthy of a TOTAL rebuild !!!
Stay tuned friends, this could be a total wreck or one hell of a diamond in the rough...
Pics will be posted later this evening, I know I know, never start a thread like this until I have pics BUT I was so excited I couldnt help myself
BRRAAAAAAAPPPPPPPPPPPPPPPPPPP
Stay tuned friends, this could be a total wreck or one hell of a diamond in the rough...
Pics will be posted later this evening, I know I know, never start a thread like this until I have pics BUT I was so excited I couldnt help myself
BRRAAAAAAAPPPPPPPPPPPPPPPPPPP
Is an '02-'07 plastics conversion in it's future?
How much work goes into converting a 01 to house the 02-07 plastics...im not sure on that part
The Shop
Read up on it here:
http://www.allthingsmoto.com/forums/f-31/started-my-conversion-40098/
hando's 01 CR250 was always looking factory when he had it
The best (and worst) thing about this sport is due to injuries/incomes/economy you can get great stuff almost for free. If your smart of course. Pitty the dumbasses that spend over 4 grand on dirt bikes at the amateur/hobby level.
Keep the ideas comming guys, I love it. Bringing back the 2 smoke love, wow its been a long time. My last 2 stroke was a 04 KX500 Oh, I just shed a tear, ok ok quick someone change the subject on the fact that I no longer have the last 500 2 smoker ever made
Of course... it didn't have any graphics on it.
Pit Row
Be sure to check the crank play, that model was rough on them. That bike can yank arms out. Closest thing to the 93 motor. Honda did it right that year.
Congrats on the score.
Sadly, I sold that bike.
Gladly, I have another conversion under the knife.
Thus far I have mixed emotions, Its bad but could be ALOT worse I suppose. I got a ton of elbow grease in lastnight. Put a solid 5 1/2 hours into tearing it all down. Had to be at work at 7 tho so I shut it down early. Piston skirt is shattered, so a bottom end rebuild is a MUST. Im sure the bottom end looks like a war zone, but I enjoy projects so here we go!
Post a reply to: My $350 01' CR250R Project