Posts: 2680
Joined: 5/23/2009
Location: Concord, NC USA
Tuned Suspension
Weisco Piston 
Hinson Clutch and Cover
Works Connection Holeshot Device
Scar Titanium pegs
Renthal Ultra-Light Sprockets
Arc Composite Textured Levers
Moto Hose radiator hoses
Acerbis Plastics
Armored Graphics replica Graphics and numbers.
“Let the Good Times Roll”
Posts: 5981
Joined: 10/13/2013
Location: Big Sand Whoops, MI USA
Posts: 277
Joined: 6/24/2014
Location: Fresno, CA USA
Posts: 2680
Joined: 5/23/2009
Location: Concord, NC USA
Posts: 2225
Joined: 8/7/2009
Location: NM, USA
As long as you fix your front brake hose routing you will live to enjoy it! 
How did the hand done port work look while you were in there?
Posts: 2680
Joined: 5/23/2009
Location: Concord, NC USA
Posts: 646
Joined: 3/1/2017
Location: Beverly Hills, CA USA
Posts: 528
Joined: 1/7/2016
Location: Arvada, CO USA
Posts: 9006
Joined: 10/31/2009
Location: CA, USA
Awesome bike and truck!!!
Current rides: 2020 CRF450RWE and 2019 TC300
Occasional ride for VMX: 1985 CR500RF
Adventure/Road bike: CRF1000L
Posts: 142
Joined: 1/29/2018
Location: Lakewood, CO USA
Sweet!!! Great combination...crf and a Taco...that's how I roll too. You have excellent taste
Posts: 10
Joined: 11/22/2018
Location: Los Angeles, CA USA
Posts: 2300
Joined: 3/18/2016
Location: CA, USA
Posts: 98
Joined: 4/1/2008
Location: USA
Posts: 2680
Joined: 5/23/2009
Location: Concord, NC USA
Posts: 4110
Joined: 4/11/2010
Location: ATA
Posts: 927
Joined: 8/14/2017
Location: Mountain Top, PA USA
Posts: 1389
Joined: 5/28/2016
Location: AUS
Somebody must have won the lottery! Christmas came early?
2020 YZ450F
2006 YZ125
2013 YZ 250F special edition
2017 YZ 250
2015 YZ 250f soecial edition
2019 KTM 85 big wheel
1979 YZ 250
Posts: 1980
Joined: 3/18/2017
Location: Boston, MA USA
Edited Date/Time:
Hes clearly tucking in the front brake line to try to clean up the routing. It looks good. Idk why KTM is the only ones who have figured this out.. Since you have fat bars you might as well cut off that loop on the top of the plate that goes across the bar pad on stock bars, since those bars dont have the top bar or pad, clean it up the whole way... again like KTM.
Posts: 2680
Joined: 5/23/2009
Location: Concord, NC USA
Edited Date/Time:
JWACK wrote:As long as you fix your front brake hose routing you will live to enjoy it!
How did the hand done port work look while you ...moreUnderground wrote:WTF am I missing here? You can disassemble an engine but run the brake hose like that??
I didn’t put the plastics on. I haven’t had a chance to fix it. My son put the graphics on the plastic and then on the bike.
However, I like how clean it looks, so I am going to find a way to keep it looking this way.
“Let the Good Times Roll”
Posts: 658
Joined: 3/14/2015
Location: SWE
Agree it looks really clean but you see how the brake line is tweaked at the first picture, no bueno. If you can find a fix for that then I would say it's fine.
Posts: 1631
Joined: 2/15/2012
Location: Virginia Beach, VA USA
Edited Date/Time:
Absolutely stunning bike.
If I owned a CRF450 and especially a WE I would have to get a set of those Red HRC like triple clamps Ride Engineering sells for the WE.
https://ride-engineering.com/products.php?d=1&p=bm&pn=CR-BTB23-WE&t=cr
https://www.keeferinctesting.com/offroad-testing/2018/9/26/ride-engineerings-2019-honda-crf450rwe-triple-clampnbsp#
Posts: 2680
Joined: 5/23/2009
Location: Concord, NC USA
Posts: 9006
Joined: 10/31/2009
Location: CA, USA
Me too, they look sick!
Current rides: 2020 CRF450RWE and 2019 TC300
Occasional ride for VMX: 1985 CR500RF
Adventure/Road bike: CRF1000L
Posts: 4110
Joined: 4/11/2010
Location: ATA
JWACK wrote:As long as you fix your front brake hose routing you will live to enjoy it!
How did the hand done port work look while you ...moreUnderground wrote:WTF am I missing here? You can disassemble an engine but run the brake hose like that??
Fair enough. Bike and kit looks good. Must have been awesome feeling buying all that stuff and getting kitted out
Posts: 5858
Joined: 2/25/2009
Location: Mankato, MN USA
Posts: 2680
Joined: 5/23/2009
Location: Concord, NC USA
JWACK wrote:As long as you fix your front brake hose routing you will live to enjoy it!
How did the hand done port work look while you ...moreUnderground wrote:WTF am I missing here? You can disassemble an engine but run the brake hose like that??
Underground wrote:Fair enough. Bike and kit looks good. Must have been awesome feeling buying all that stuff and getting kitted out
It’s definitely the sickest race bike I’ve ever had, which has been plenty. I tricked my RMZ out the same way. I love both my bikes.
“Let the Good Times Roll”
Posts: 1470
Joined: 12/22/2010
Location: CAN
Johnny Smokes wrote:Looks like a slow vet guys set up.
Did you have somebody in mind when you posted that?
Posts: 763
Joined: 8/3/2014
Location: NC, USA
I just got a new Toyota Tacoma TRD Sport 4X4 
and I love it, it looks just like this one in the photo. Also looking at the new Honda motorcycles too.
Posts: 927
Joined: 8/14/2017
Location: Mountain Top, PA USA
Johnny Smokes wrote:Looks like a slow vet guys set up.
DTR830 wrote:no that would be a 350 & a tacoma
Sheriff245 wrote:Did you have somebody in mind when you posted that?
lol guilty 
Posts: 80
Joined: 9/17/2018
Location: NM, USA
I'm jealous. Bike is sick nice job bro... all of that must of set you back some serious coin
