Muffler- Slip-On Fmf 4.1 2018 ktm 350 sxf should I do a remap?

Related:
Create New Tag

1/14/2019 4:51 PM

I bought a Muffler-Slip-On Fmf 4.1 at my 2018 ktm 350 sxf.
I would like to know if I should do a remapping?

|

1/14/2019 9:25 PM

yea put the bitch on the 'aggressive' map and hold her wide. 13,400+ wide....

|

GP740
Since 1987

1/15/2019 7:36 AM

GeorgiePorgie wrote:

yea put the bitch on the 'aggressive' map and hold her wide. 13,400+ wide....

Always led him on the map 2. Should plug it to your computer?

|

1/15/2019 7:59 AM

Would you get less life out of your engine with a remap?
I’m at 65 hrs on my 350 and don’t think I’m anywhere near a rebuild.
But seems long for some people on here.
Would you do a revbuild on an engine sooner after a remap.

|

1/15/2019 8:04 AM

I don't think it's necessary with just a slip on. I have them on my bikes but more because I like how they look and sound, and they're slightly lighter. I don't think a slip on does much of anything for performance.

|

Current rides: 2021 TM 144, 2008 YZ250

1/15/2019 2:36 PM

For a slip on u dont need to map it. KTM would tell u to map if you have a 450 but 250/350 supposedly dont require remap. Cut your backfire screen out and make sure your tps is set right and it will rip

|

1/15/2019 2:52 PM

What did we all do before we had smart bikes ?

|

GP740
Since 1987

1/15/2019 2:57 PM

GeorgiePorgie wrote:

What did we all do before we had smart bikes ?

Worked on our stuff after research. Stayed outside . No fb,ig,twitter or vitalgrin

|

1/15/2019 3:22 PM
Edited Date/Time: 1/15/2019 3:22 PM

Don't tell me you replaced that one piece header that KTM put on that bike? Why would one do such a thing?

It's so joyful to have to unbolt the shock and move it to the side then wiggle and jiggle till you can slide that header off. BRILLIANT design work on the part of KTM. And don't forget to leave the shock lose so you can do the reverse when you want to put the header back on.

But, sadly, you now have two parts to that header with the FMF one so you get to skip this joyous experience. Too bad.... (

|

1/15/2019 3:22 PM

crockett wrote:

Would you get less life out of your engine with a remap?
I’m at 65 hrs on my 350 and don’t think I’m anywhere near a rebuild.
...more

Unless your a pro or expert, your probley good for at least 100 hrs, as long as you perform proper maintenance

|

1/23/2019 8:27 AM

I need to buy a slip on simply for the Spark Arrestor..

I have an 18’ FC350, no need to remap?

|

1/23/2019 8:30 AM

I’ve never remapped a bike for adding a pipe......it’s not gonna blow up.

|

GP740
Since 1987

1/27/2019 10:17 AM

Thanks

|