Look who is into drag racing!

McG194
Posts
3411
Joined
9/7/2017
Location
Palm Coast, FL US
8/3/2021 6:08am
Watching the crew rebuild between rounds is awesome. There was an article on it recently of how many minutes or seconds from step to step. If...
Watching the crew rebuild between rounds is awesome. There was an article on it recently of how many minutes or seconds from step to step. If you go spend some time watching them leave the line. Controlled violence. Then spend some time at the finish line as they go past the traps.
Watching turn around is all you ever need to know about having a good system and teamwork. No one is rushing, no one is in a hurry or frazzled. Work just gets done in an incredibly organized and efficient manner with every man knowing exactly what he's supposed to do and when. The amount of work done in a short period of time is amazing.

I was lucky enough to get VIP access to Schumacher Racing at the Gatornationals a few years back. Amazing being in the hauler with Antron Brown and he was doing some next level visualization complete with his body jerking to the G-forces. On the start line being next to that violence was something that I will never forget. You feel it in your chest so hard that you wonder if it will affect your heartbeat.
3
Hasletjoe
Posts
439
Joined
7/29/2013
Location
Haslet, TX US
8/3/2021 7:07am
chuckie108 wrote:
If you’re curious why Hunter even cares, probably has something to do with these Interesting TF stats: * One dragster's 500-inch Hemi makes more horsepower then...
If you’re curious why Hunter even cares, probably has something to do with these Interesting TF stats:


* One dragster's 500-inch Hemi makes more horsepower then the first 8 rows at Daytona.

* Under full throttle, a dragster engine consumes 1 1/2 gallons of nitro per second, the same rate of fuel consumption as a fully loaded 747 but with 4 times the energy volume.

* The supercharger takes more power to drive than a stock hemi makes.

* Even with nearly 3000 CFM of air being rammed in by the supercharger on overdrive, the fuel mixture is compressed into nearly-solid form before ignition. Cylinders run on the verge of hydraulic lock.

* Dual magnetos apply 44 amps to each spark plug. This is the output of an arc welder in each cylinder.

* At stoichiometric (exact) 1.7:1 air/fuel mixture (for nitro), the flame front of nitromethane measures 7050 degrees F.

* Nitromethane burns yellow. The spectacular white flame seen above the stacks at night is raw burning hydrogen, dissociated from atmospheric water vapor by the searing exhaust gases.

* Spark plug electrodes are totally consumed during a pass. After 1/2 way, the engine is dieseling from compression-plus the glow of exhaust valves at 1400 degrees F. The engine can only be shut down by cutting off its fuel flow.

* If spark momentarily fails early in the run, unburned nitro builds up in those cylinders and then explodes with a force that can blow cylinder heads off the block in pieces or blow the block in half.

* Dragsters twist the crank (torsionally) so far (20 degrees in the big end of the track) that sometimes cam lobes are ground offset from front to rear to re-phase the valve timing somewhere closer to synchronization with the pistons.

* To exceed 300mph in 4.5 seconds dragsters must accelerate at an average of over 4G's. But in reaching 200 mph well before 1/2 track, launch acceleration is closer to 8G's.

* If all the equipment is paid off, the crew worked for free, and for once NOTHING BLOWS UP, each run costs $1000.00 per second.

* Dragsters reach over 300 miles per hour before you have read this sentence.

Did you know …

… that the nitromethane-powered engines of NHRA Top Fuel dragsters and Funny Cars produce approximately 7,000 horsepower, about 37 times that of the average street car?

… that one cylinder of the eight cylinders of a Top Fuel dragster or a Funny Car produces 750 horsepower, equaling the entire horsepower output of a NASCAR engine?

… that the gasoline-powered engines of NHRA Pro Stock cars produce about 1,200 horsepower, about eight times that of the average street car?

… that an NHRA Top Fuel dragster accelerates from 0 to 100 mph in less than .8-second, almost 11 seconds quicker than it takes a production Porsche 911 Turbo to reach the same speed?

… that an NHRA Top Fuel dragster leaves the starting line with a force nearly five times that of gravity, the same force of the space shuttle when it leaves the launching pad at Cape Canaveral?

… that an NHRA Funny Car is slowed by a reverse force more than seven times that of gravity when both parachutes deploy simultaneously?

… that NHRA Top Fuel dragsters and Funny Cars consume between four and five gallons of fuel during a quarter-mile run, which is equivalent to between 16 and 20 gallons per mile?

… that NHRA Top Fuel dragsters and Funny Cars use between 10 and 12 gallons of fuel for a complete pass, including the burnout, backup to the starting line, and quarter-mile run?

… that NHRA Top Fuel dragsters and Funny Cars travel the length of more than four football fields in less than five seconds?

… that NHRA Top Fuel dragsters can exceed 280 mph in just 660 feet?

… that from a standing start, NHRA Top Fuel dragsters accelerate faster than a jumbo jet, a fighter jet, and a Formula One race car?

… that a fuel pump for an NHRA Top Fuel dragster and Funny Car delivers 65 gallons of fuel per minute, equivalent to eight bathroom showers running at the same time?

… that the fuel-line pressure for NHRA Top Fuel dragsters and Funny Cars is between 400 and 500 pounds, about 20 times greater than the pressure on passenger-car fuel pumps?

… that depending on size and angle, the large rear wing on an NHRA Top Fuel dragster develops between 4,000 and 8,000 pounds of downforce?

… that the 17-inch rear tires used on NHRA Top Fuel dragsters and Funny Cars wear out after four to six runs, or about two miles? Some brands of passenger-car tires are guaranteed for 80,000 miles.

… that it takes just 15/100ths of a second for all 7,000 horsepower of an NHRA Top Fuel dragster engine to reach the rear wheels?

… that it's desirable for an NHRA Top Fuel dragster to race with its front wheels inches off the ground for about the first 200 feet of the run? This ensures proper weight transfer to the rear wheels, a crucial part of a good launch and quick run.

… that the nitromethane used to power the engines of NHRA Top Fuel dragsters and Funny Cars costs about $30 per gallon?
B Lenny wrote:
They're producing around 11,000 HP now...Dry
In watching one of the broadcasts, they were touring one of the teams facility and went by the dyno room. Reporter asked her escort to see and of course they declined. She then asked what kind of power they were making. Employee candidly said somewhere North of 12K HP. She pried some more and he confessed, the Dyno only goes to 12K so we do not really know. This was a few years back, so I am sure they have improved....

Interesting fact, a Top Fuel motor turns some where near 1000 revolutions between rebuilds. From test - Burnout - Run. That is amazing.

No wonder it is an expensive hobby!
MeTed
Posts
70
Joined
4/18/2012
Location
Daytona Beach, FL US
Fantasy
1230th
8/3/2021 8:21am
SEE ARE125 wrote:
Obviously not on the same level, but has anyone ever drove the ones in Daytona? It’s been several years, but this go-kart track had some. IIRC...
Obviously not on the same level, but has anyone ever drove the ones in Daytona? It’s been several years, but this go-kart track had some. IIRC they were propane powered and did 0-80 in like 1.7 seconds or something stupid. They were on rails for safety, 4 cars wide, and it braked automatically for you at the end. The only thing you had to do was hit the gas when the light turned green, steer and shift to 2nd when the shift light came on. One ticket gave you two runs down the “track.” I nailed the first run, but after that I was fucked. Went back to the starting line and I was a mess, hands were shaking, jittery as hell. I can’t imagine driving the real thing.
Unfortunately that place closed down a few years ago but those dragsters were awesome!
1

The Shop

Retablo
Posts
14
Joined
8/2/2020
Location
New York, NY US
8/3/2021 8:30am
chuckie108 wrote:
If you’re curious why Hunter even cares, probably has something to do with these Interesting TF stats: * One dragster's 500-inch Hemi makes more horsepower then...
If you’re curious why Hunter even cares, probably has something to do with these Interesting TF stats:


* One dragster's 500-inch Hemi makes more horsepower then the first 8 rows at Daytona.

* Under full throttle, a dragster engine consumes 1 1/2 gallons of nitro per second, the same rate of fuel consumption as a fully loaded 747 but with 4 times the energy volume.

* The supercharger takes more power to drive than a stock hemi makes.

* Even with nearly 3000 CFM of air being rammed in by the supercharger on overdrive, the fuel mixture is compressed into nearly-solid form before ignition. Cylinders run on the verge of hydraulic lock.

* Dual magnetos apply 44 amps to each spark plug. This is the output of an arc welder in each cylinder.

* At stoichiometric (exact) 1.7:1 air/fuel mixture (for nitro), the flame front of nitromethane measures 7050 degrees F.

* Nitromethane burns yellow. The spectacular white flame seen above the stacks at night is raw burning hydrogen, dissociated from atmospheric water vapor by the searing exhaust gases.

* Spark plug electrodes are totally consumed during a pass. After 1/2 way, the engine is dieseling from compression-plus the glow of exhaust valves at 1400 degrees F. The engine can only be shut down by cutting off its fuel flow.

* If spark momentarily fails early in the run, unburned nitro builds up in those cylinders and then explodes with a force that can blow cylinder heads off the block in pieces or blow the block in half.

* Dragsters twist the crank (torsionally) so far (20 degrees in the big end of the track) that sometimes cam lobes are ground offset from front to rear to re-phase the valve timing somewhere closer to synchronization with the pistons.

* To exceed 300mph in 4.5 seconds dragsters must accelerate at an average of over 4G's. But in reaching 200 mph well before 1/2 track, launch acceleration is closer to 8G's.

* If all the equipment is paid off, the crew worked for free, and for once NOTHING BLOWS UP, each run costs $1000.00 per second.

* Dragsters reach over 300 miles per hour before you have read this sentence.

Did you know …

… that the nitromethane-powered engines of NHRA Top Fuel dragsters and Funny Cars produce approximately 7,000 horsepower, about 37 times that of the average street car?

… that one cylinder of the eight cylinders of a Top Fuel dragster or a Funny Car produces 750 horsepower, equaling the entire horsepower output of a NASCAR engine?

… that the gasoline-powered engines of NHRA Pro Stock cars produce about 1,200 horsepower, about eight times that of the average street car?

… that an NHRA Top Fuel dragster accelerates from 0 to 100 mph in less than .8-second, almost 11 seconds quicker than it takes a production Porsche 911 Turbo to reach the same speed?

… that an NHRA Top Fuel dragster leaves the starting line with a force nearly five times that of gravity, the same force of the space shuttle when it leaves the launching pad at Cape Canaveral?

… that an NHRA Funny Car is slowed by a reverse force more than seven times that of gravity when both parachutes deploy simultaneously?

… that NHRA Top Fuel dragsters and Funny Cars consume between four and five gallons of fuel during a quarter-mile run, which is equivalent to between 16 and 20 gallons per mile?

… that NHRA Top Fuel dragsters and Funny Cars use between 10 and 12 gallons of fuel for a complete pass, including the burnout, backup to the starting line, and quarter-mile run?

… that NHRA Top Fuel dragsters and Funny Cars travel the length of more than four football fields in less than five seconds?

… that NHRA Top Fuel dragsters can exceed 280 mph in just 660 feet?

… that from a standing start, NHRA Top Fuel dragsters accelerate faster than a jumbo jet, a fighter jet, and a Formula One race car?

… that a fuel pump for an NHRA Top Fuel dragster and Funny Car delivers 65 gallons of fuel per minute, equivalent to eight bathroom showers running at the same time?

… that the fuel-line pressure for NHRA Top Fuel dragsters and Funny Cars is between 400 and 500 pounds, about 20 times greater than the pressure on passenger-car fuel pumps?

… that depending on size and angle, the large rear wing on an NHRA Top Fuel dragster develops between 4,000 and 8,000 pounds of downforce?

… that the 17-inch rear tires used on NHRA Top Fuel dragsters and Funny Cars wear out after four to six runs, or about two miles? Some brands of passenger-car tires are guaranteed for 80,000 miles.

… that it takes just 15/100ths of a second for all 7,000 horsepower of an NHRA Top Fuel dragster engine to reach the rear wheels?

… that it's desirable for an NHRA Top Fuel dragster to race with its front wheels inches off the ground for about the first 200 feet of the run? This ensures proper weight transfer to the rear wheels, a crucial part of a good launch and quick run.

… that the nitromethane used to power the engines of NHRA Top Fuel dragsters and Funny Cars costs about $30 per gallon?
This isn’t an ‘amazing’ fact, but more of a curiosity:

Top Fuel and Funny cars front tires don’t line up exactly (spindle staggering).

Staggering the front spindles (what the wheels mount to) are set up with one wheel ahead of the other ( about 1” to 2”) which in turn gives the starting beams a larger target that will give a longer roll out. This will give your car a running start at the starting beams. Legal cheating in a small sense, but highly regulated.
4
Falcon
Posts
10129
Joined
11/16/2011
Location
Menifee, CA US
Fantasy
856th
8/3/2021 11:28am
* Dragsters reach over 300 miles per hour before you have read this sentence.


Untrue. I can read a lot faster than the author of that sentence thinks I can. (I just tested it with a stopwatch. My results are 0.61 seconds.)
Still, it's crazy how the physics work in that racing format. The part about the pressures involved with the fuel intake are mind blowing.
5
T-Fish
Posts
3062
Joined
12/14/2009
Location
Sparta, WI US
Fantasy
335th
8/3/2021 7:03pm
Small tire radial no time racer here!
Whatcha got?
PNWRider
Posts
476
Joined
1/31/2021
Location
Stanwood, WA US
8/3/2021 7:26pm Edited Date/Time 8/3/2021 7:27pm
chuckie108 wrote:
If you’re curious why Hunter even cares, probably has something to do with these Interesting TF stats: * One dragster's 500-inch Hemi makes more horsepower then...
If you’re curious why Hunter even cares, probably has something to do with these Interesting TF stats:


* One dragster's 500-inch Hemi makes more horsepower then the first 8 rows at Daytona.

* Under full throttle, a dragster engine consumes 1 1/2 gallons of nitro per second, the same rate of fuel consumption as a fully loaded 747 but with 4 times the energy volume.

* The supercharger takes more power to drive than a stock hemi makes.

* Even with nearly 3000 CFM of air being rammed in by the supercharger on overdrive, the fuel mixture is compressed into nearly-solid form before ignition. Cylinders run on the verge of hydraulic lock.

* Dual magnetos apply 44 amps to each spark plug. This is the output of an arc welder in each cylinder.

* At stoichiometric (exact) 1.7:1 air/fuel mixture (for nitro), the flame front of nitromethane measures 7050 degrees F.

* Nitromethane burns yellow. The spectacular white flame seen above the stacks at night is raw burning hydrogen, dissociated from atmospheric water vapor by the searing exhaust gases.

* Spark plug electrodes are totally consumed during a pass. After 1/2 way, the engine is dieseling from compression-plus the glow of exhaust valves at 1400 degrees F. The engine can only be shut down by cutting off its fuel flow.

* If spark momentarily fails early in the run, unburned nitro builds up in those cylinders and then explodes with a force that can blow cylinder heads off the block in pieces or blow the block in half.

* Dragsters twist the crank (torsionally) so far (20 degrees in the big end of the track) that sometimes cam lobes are ground offset from front to rear to re-phase the valve timing somewhere closer to synchronization with the pistons.

* To exceed 300mph in 4.5 seconds dragsters must accelerate at an average of over 4G's. But in reaching 200 mph well before 1/2 track, launch acceleration is closer to 8G's.

* If all the equipment is paid off, the crew worked for free, and for once NOTHING BLOWS UP, each run costs $1000.00 per second.

* Dragsters reach over 300 miles per hour before you have read this sentence.

Did you know …

… that the nitromethane-powered engines of NHRA Top Fuel dragsters and Funny Cars produce approximately 7,000 horsepower, about 37 times that of the average street car?

… that one cylinder of the eight cylinders of a Top Fuel dragster or a Funny Car produces 750 horsepower, equaling the entire horsepower output of a NASCAR engine?

… that the gasoline-powered engines of NHRA Pro Stock cars produce about 1,200 horsepower, about eight times that of the average street car?

… that an NHRA Top Fuel dragster accelerates from 0 to 100 mph in less than .8-second, almost 11 seconds quicker than it takes a production Porsche 911 Turbo to reach the same speed?

… that an NHRA Top Fuel dragster leaves the starting line with a force nearly five times that of gravity, the same force of the space shuttle when it leaves the launching pad at Cape Canaveral?

… that an NHRA Funny Car is slowed by a reverse force more than seven times that of gravity when both parachutes deploy simultaneously?

… that NHRA Top Fuel dragsters and Funny Cars consume between four and five gallons of fuel during a quarter-mile run, which is equivalent to between 16 and 20 gallons per mile?

… that NHRA Top Fuel dragsters and Funny Cars use between 10 and 12 gallons of fuel for a complete pass, including the burnout, backup to the starting line, and quarter-mile run?

… that NHRA Top Fuel dragsters and Funny Cars travel the length of more than four football fields in less than five seconds?

… that NHRA Top Fuel dragsters can exceed 280 mph in just 660 feet?

… that from a standing start, NHRA Top Fuel dragsters accelerate faster than a jumbo jet, a fighter jet, and a Formula One race car?

… that a fuel pump for an NHRA Top Fuel dragster and Funny Car delivers 65 gallons of fuel per minute, equivalent to eight bathroom showers running at the same time?

… that the fuel-line pressure for NHRA Top Fuel dragsters and Funny Cars is between 400 and 500 pounds, about 20 times greater than the pressure on passenger-car fuel pumps?

… that depending on size and angle, the large rear wing on an NHRA Top Fuel dragster develops between 4,000 and 8,000 pounds of downforce?

… that the 17-inch rear tires used on NHRA Top Fuel dragsters and Funny Cars wear out after four to six runs, or about two miles? Some brands of passenger-car tires are guaranteed for 80,000 miles.

… that it takes just 15/100ths of a second for all 7,000 horsepower of an NHRA Top Fuel dragster engine to reach the rear wheels?

… that it's desirable for an NHRA Top Fuel dragster to race with its front wheels inches off the ground for about the first 200 feet of the run? This ensures proper weight transfer to the rear wheels, a crucial part of a good launch and quick run.

… that the nitromethane used to power the engines of NHRA Top Fuel dragsters and Funny Cars costs about $30 per gallon?
jemcee wrote:
Another fact that is impressive If a motogp bike goes past at top speed the drag car will beat it to the finish line from a...
Another fact that is impressive

If a motogp bike goes past at top speed the drag car will beat it to the finish line from a standing start

(That may not be accurate but I'd have to be way better at maths to refute it haha)
I believe that’s accurate. My buddy had a top fuel trivia poster years ago in his garage. It said that the C5 Lingenfelter Corvette could hit the line at top speed (220’s as I recall) and the dragster would still win.
deluxeman
Posts
789
Joined
6/27/2016
Location
Saranac, MI US
8/5/2021 10:01am
Watching the crew rebuild between rounds is awesome. There was an article on it recently of how many minutes or seconds from step to step. If...
Watching the crew rebuild between rounds is awesome. There was an article on it recently of how many minutes or seconds from step to step. If you go spend some time watching them leave the line. Controlled violence. Then spend some time at the finish line as they go past the traps.
McG194 wrote:
Watching turn around is all you ever need to know about having a good system and teamwork. No one is rushing, no one is in a...
Watching turn around is all you ever need to know about having a good system and teamwork. No one is rushing, no one is in a hurry or frazzled. Work just gets done in an incredibly organized and efficient manner with every man knowing exactly what he's supposed to do and when. The amount of work done in a short period of time is amazing.

I was lucky enough to get VIP access to Schumacher Racing at the Gatornationals a few years back. Amazing being in the hauler with Antron Brown and he was doing some next level visualization complete with his body jerking to the G-forces. On the start line being next to that violence was something that I will never forget. You feel it in your chest so hard that you wonder if it will affect your heartbeat.
There is nothing like watching a couple of Nitro cars making a full pass. It is violence in action. Even in the stands your vision is blurry, the vibrations go right through your body. It is really an experience.
2
skeef
Posts
1208
Joined
7/18/2018
Location
AZ US
Fantasy
1407th
8/5/2021 10:34am
Or if you're in the pits and they start one up and your eyes and nose start burning from the nitro. Ah great memories, I went every year when I was a kid.
2
JOHN CHOATE
Posts
2023
Joined
9/18/2008
Location
Dallas, NC US
8/5/2021 10:37am
Gene Fulton built 762ci motor with 4 stages of laughing gas (N2O).

7
Zesiger 112
Posts
2199
Joined
3/4/2013
Location
Pink Hill, NC US
Fantasy
2058th
8/5/2021 10:45am
Small tire radial no time racer here!
T-Fish wrote:
Whatcha got?
Foxbody hatch mustang. 440ci sbf on methanol with a 106mm forced inductions turbo. Running on MT 275 pro radials. And a 580ci Racetech dragster for bracket racing. How about you?



7
skeef
Posts
1208
Joined
7/18/2018
Location
AZ US
Fantasy
1407th
8/5/2021 10:50am
Dude that fox body is legit. No time/ Pro Tree? What times do you run
Zesiger 112
Posts
2199
Joined
3/4/2013
Location
Pink Hill, NC US
Fantasy
2058th
8/5/2021 11:38am Edited Date/Time 8/5/2021 11:52am
skeef wrote:
Dude that fox body is legit. No time/ Pro Tree? What times do you run
Still getting it sorted and it’s very dependent on track condition, but we are shooting for 4.teens about 175mph in the 1/8th. That’s with steel doors, glass, electric windows, and interior!
3
T-Fish
Posts
3062
Joined
12/14/2009
Location
Sparta, WI US
Fantasy
335th
8/5/2021 4:18pm
Small tire radial no time racer here!
T-Fish wrote:
Whatcha got?
Foxbody hatch mustang. 440ci sbf on methanol with a 106mm forced inductions turbo. Running on MT 275 pro radials. And a 580ci Racetech dragster for bracket...
Foxbody hatch mustang. 440ci sbf on methanol with a 106mm forced inductions turbo. Running on MT 275 pro radials. And a 580ci Racetech dragster for bracket racing. How about you?



That’s awesome, and waaaaaaaay more than I can handle!

The only thing I own that sees a strip is my 1971 Scamp. It had a very mild 440 with a 250 shot and ran 10.4 1/4 mile. I yanked the 440 and am finishing up a 543” stroker (all that’s left to do is measure for pushrod length). Should be a solid 700hp. No idea what it’ll run, but hopefully it’ll run the same or better. It’ll be good enough to turn some heads and cruise town.
5
gharmon
Posts
2455
Joined
4/1/2008
Location
Valley, AL US
8/5/2021 9:54pm
philG wrote:
Saying how much fuel it uses a minute seems a bit odd seeing as they only race for 4 seconds. An awful lot of work...
Saying how much fuel it uses a minute seems a bit odd seeing as they only race for 4 seconds.

An awful lot of work , for not a lot of action.

Still cool though
It may not seem like much and i was nowhere this level but i drag raced a supercharged 5.0 mustang (89) in the mid 90's thur 2004. I only was running 9.30's @154 in 1/4 but was still running street 5 speed tranny.
Let me tell ya, when you let that foot off the clutch at 6500 rpm and the front wheels come 3ft off the ground, then you let her down to grap second and they come back up another foot this time, then manage that beast the rest of the way down the track, man those where some of the best times of my life. This is especially true when you know all that blood, sweat and tears was from all those countless hours you spent doing it yourself! It might have only been 9.3 seconds for me but damn it was fun.
Then my boys got bigger so i chose to go back to my roots of dirt bikes just so i could spend a little more time with them!
3
digger
Posts
737
Joined
4/1/2008
Location
Upstate, NY US
Fantasy
3883rd
8/6/2021 5:01am
I was a drag racer for 20 years before switching over to Harescrambles and offroad.
I started off in a BB 69’ Camaro and then worked my way up to a 240” Mullis dragster(digger) with a 582” Chevy. I was all over the east coast racing in brackets, super comp and TD. They were great times with my father.
I still follow the sport at all levels and miss it at times.
Zesiger 112
Posts
2199
Joined
3/4/2013
Location
Pink Hill, NC US
Fantasy
2058th
8/6/2021 6:32am
T-Fish wrote:
Whatcha got?
Foxbody hatch mustang. 440ci sbf on methanol with a 106mm forced inductions turbo. Running on MT 275 pro radials. And a 580ci Racetech dragster for bracket...
Foxbody hatch mustang. 440ci sbf on methanol with a 106mm forced inductions turbo. Running on MT 275 pro radials. And a 580ci Racetech dragster for bracket racing. How about you?



T-Fish wrote:
That’s awesome, and waaaaaaaay more than I can handle! The only thing I own that sees a strip is my 1971 Scamp. It had a very...
That’s awesome, and waaaaaaaay more than I can handle!

The only thing I own that sees a strip is my 1971 Scamp. It had a very mild 440 with a 250 shot and ran 10.4 1/4 mile. I yanked the 440 and am finishing up a 543” stroker (all that’s left to do is measure for pushrod length). Should be a solid 700hp. No idea what it’ll run, but hopefully it’ll run the same or better. It’ll be good enough to turn some heads and cruise town.
Nice! There is a scamp that races with our group in the true street class. It is very competitive.
tprice07
Posts
2373
Joined
9/29/2009
Location
Fort Dodge, IA US
8/6/2021 8:26am
There's a great interview on Whiskey Throttle with the Lawrence brothers..they talk about their dad's interest in drag racing and how they started riding moto because they were too small to race the JR dragsters at the time.

Post a reply to: Look who is into drag racing!

The Latest