Posts
188
Joined
11/9/2011
Location
NL
Edited Date/Time
3/26/2020 4:41pm
Heyo, started the thread to see who refreshed his trusty steed for this years racing/weekend riding!
Promoted from a 2013 250sx to a 19 250sx this winter and finally came around putting it to my personal taste.
Now i’ve shown you mine, let’s see yours!
Promoted from a 2013 250sx to a 19 250sx this winter and finally came around putting it to my personal taste.
Now i’ve shown you mine, let’s see yours!
The Shop
Looks good!
I've was running hand guards to block the cold air, but it's starting to warm up in NJ, so I ditched them. Here's my 13 rendition:
2020 setup. Jealous of you guys that have ridden and been riding!
Wife's 250 and my 450. Ready for round 1 of the OSCS MX this weekend.
Pit Row
Wound up 9th overall with SoCal otmx so I figured fuggit, Run It !
Pic from my trip to Millville last year. Same set up in 2020!
Race bike
The other issue was the right shroud. Not sure if it had anything to do with the shroud itself (Acerbis), but I had to file the aluminum inserts and make the holes more oblong, allowing the shroud to sit more flush against the tank when bolted up. This took maybe 10 minutes to do though... Just put the shroud up to the tank and see if everything lines up, make note of where it doesn't and file the inserts accordingly. I put them in a vise and used a round file.
Left shroud required no modification.
I did use the Clarke tank padding. Stock rubber pad is no go unless you want to cut/sand it down or something.
Overall I'm satisfied with the product and would do it all again.
Edit: Sorry, meant to quote hanzhongluboy
Went with retro ‘96 graphics with updated twist, new suspension and going to try the Hoosiers this year
Post a reply to: Let’s see those 2020 setups for the year!