Ktm Sxf silencer will a 2019 250 fit a 2020 350

Kevams
Profile picture for user Kevams
Posts
4
Joined
10/13/2020
Location
GB
Kevams
Edited Date/Time 10/13/2020 5:46pm
Hi there

Just a quick question I cant find a definitive answer for looking online.

I have a 2020 Ktm Sxf350 and have been offered a new Hgs Rear silencer from a 2019 sxf 250.

Will this be the correct silencer for a 350sxf ?
When i look at fitments on the Akrapovic, fmf websites etc all sites have conflicting info on what fits what.
Some same 330/450, others 250/350 and some all seprate.

Also will the silencer make any differance or have any advantages. (I just like the look of it !lol) not really looking for more power .

Any advice appreciated
1
|
Markee
Profile picture for user Markee
Posts
3544
Joined
4/15/2013
Location
Suffolk, VA US
Fantasy
1941st
Markee 10/13/2020 11:24am
10/13/2020 11:24am
My advice is to go to rockymountainatv.com or motosprot.com and look up the two bikes oem part numbers. Now the 19 and 20 have not changed for either bike.
1
Toby259
Profile picture for user Toby259
Posts
60
Joined
10/23/2019
Location
Rockford, MI US
Toby259 10/13/2020 11:41am
10/13/2020 11:41am Edited Date/Time 10/13/2020 11:42am
I bought the FMF 4.1 for my 2019 350 SXF when I got the bike new in 2018. FMF claimed the 350 and 450 were the same part number. The muffler didn't line up at the mounting holes, it was about 5mm off. The pipe diameter was fine but I could not make it fit the mounting hole so I returned it. If you look closely at the bend near the joint (where the kick-starter would normally be) the 250/350 look very similar and the 450 looks less bent. Sorry this does not directly answer your question - but the 450 one wouldn't work on my 350.
1
Kevams
Profile picture for user Kevams
Posts
4
Joined
10/13/2020
Location
GB
Kevams 10/13/2020 11:53am
10/13/2020 11:53am
Toby259 wrote:
I bought the FMF 4.1 for my 2019 350 SXF when I got the bike new in 2018. FMF claimed the 350 and 450 were the...
I bought the FMF 4.1 for my 2019 350 SXF when I got the bike new in 2018. FMF claimed the 350 and 450 were the same part number. The muffler didn't line up at the mounting holes, it was about 5mm off. The pipe diameter was fine but I could not make it fit the mounting hole so I returned it. If you look closely at the bend near the joint (where the kick-starter would normally be) the 250/350 look very similar and the 450 looks less bent. Sorry this does not directly answer your question - but the 450 one wouldn't work on my 350.
Thanks for the reply and help- appreciated. It should be a simple thing to find out...well you would think anyway!
1
Kevams
Profile picture for user Kevams
Posts
4
Joined
10/13/2020
Location
GB
Kevams 10/13/2020 11:56am
10/13/2020 11:56am
Markee wrote:
My advice is to go to rockymountainatv.com or motosprot.com and look up the two bikes oem part numbers. Now the 19 and 20 have not changed...
My advice is to go to rockymountainatv.com or motosprot.com and look up the two bikes oem part numbers. Now the 19 and 20 have not changed for either bike.
I'll check it out now - thank you

The Shop

See All »
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7358
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
Fantasy
2361st
CarlinoJoeVideo 10/13/2020 5:46pm
10/13/2020 5:46pm
2015.5-2018 250sxf and 350sxf share the same pipe and muffler.

2019,20,21 250sxf and 350sxf share the same pipe and muffler.

Hope that helps!

Post a reply to: Ktm Sxf silencer will a 2019 250 fit a 2020 350