Posts: 635
Joined: 12/29/2012
Location: WI, USA
Gave up looking for these for the 2016, 2017, 2018 KTM 250/450sxf. Anyone ever find them? I see the Rtech oversized louver add with factory color match on this site but they are not on their website. Emailed them with no response. Any help is much appreciated.
Posts: 19758
Joined: 6/15/2010
Location: Bowie, MD USA
Posts: 9973
Joined: 7/25/2009
Location: Nor Cal, CA USA
Got a bike in the shop yesterday with these and thought they looked pretty good, but I assume you're looking for the plastic louvers and not guards.
Posts: 8424
Joined: 4/1/2008
Location: SD, CA USA
Posts: 635
Joined: 12/29/2012
Location: WI, USA
The polysport louvers are 3 things.
1. Ugly non factory look molding.
2. Not even close to color match. Might match a 1992 but not 2017.
3. Pure shit - nuts spin, etc.
They should offer every person who purchased them a full refund.
Posts: 43
Joined: 2/3/2018
Location: GBR
As has been said above , don’t waste your time with the polisport ones. The colour orange is more of a rusty bronze, and the threads are terrible
Posts: 184
Joined: 3/31/2016
Location: Bozeman, MT USA
Been chasing a set myself. I think they were available from KTM for awhile but don't seem to be anymore.
Posts: 867
Joined: 5/17/2008
Location: st cloud, FL USA
I’ve tried to get the r tech ones myself after seeing them on a add here. Guess their ads are working but whoever does their website needs to update it some.
Posts: 12
Joined: 4/1/2008
Location: USA
Get a Set a few years ago with some team plastic that was given to me.., got all exited, went to put them on. And they are wider than stock. ? They must run a row or two wider radiators.
Posts: 1306
Joined: 10/22/2009
Location: Moto Paradise, UT USA
Posts: 8424
Joined: 4/1/2008
Location: SD, CA USA
Agreed, the orange looks off but I'm just saying they exist since he asked. Personally, I don't run orange ones.
Posts: 286
Joined: 2/26/2012
Location: Tulsa, OK USA
Edited Date/Time:
I can't help you find some but I can confirm they are/were available as OEM pieces. I'm running a set on my 17 450.
My home track is Reynard's, same as BB60. When Benny got his new bike I got a truckload of shit from him that didn't fit on the 18.5/19 bike. Lots of plastic, seats, seat covers, hand guards, etc. Also included were two brand new sets of the orange KTM louvers. I guarantee they are OEM KTM as Benny had NO aftermarket or Polisport stuff and FWIW they are a perfect 16 Orange color match. They do exist.
Posts: 19
Joined: 4/1/2017
Location: NLD
I have them.. but I believe it is a factory part... they are wider than original to fit larger radiators the factory teams use in europe. (Came of hsf ktm)
Posts: 117
Joined: 11/14/2016
Location: Round Rock, TX USA
Edited Date/Time:
https://www.rtechmx.com/plastiche-replica.html?cat=2428
You have to go to the euro site to see the new catalog. I ordered them thru us distributor.
I dont like the polisport ones either, although they are stout. The polisport orange is way off, like others said.
I ordered somemof these rtech ones recently to match my flo plastic. Id imagine theyll do just fine.
Posts: 117
Joined: 11/14/2016
Location: Round Rock, TX USA
Actually today found in my spam folder an email from rtech, saying these are on backorder for 4-6 weeks, and that my order was cancelled due to that, and check back with bto or pro circuit to reorder once in stock.
Thats cool i guess.
Posts: 7424
Joined: 10/31/2013
Location: PA, USA
Posts: 1306
Joined: 10/22/2009
Location: Moto Paradise, UT USA
Posts: 233
Joined: 12/11/2009
Location: Mchenry, IL USA
Polisport finally changed the color for their louvers, same part number as before but the color is the newer 16 orange.
Posts: 6745
Joined: 11/30/2013
Location: Portland/Los Angeles, CA USA
Posts: 233
Joined: 12/11/2009
Location: Mchenry, IL USA
CarlinoJoeVideo wrote:Nice, those look good! Where did you order from?
Those exact ones came from Polisport themselves, and they assured me that the part number would be the same and that they just changed the color. But when I ordered that part number for stock out of WPS, the brownish ones came again. They took them back and said they'd send more once they received the newer orange color, but apparently there are warehouses full of the brown ones still. So I'm very happy I got an orange set!
Posts: 6745
Joined: 11/30/2013
Location: Portland/Los Angeles, CA USA
CarlinoJoeVideo wrote:Nice, those look good! Where did you order from?
Yeah, that seems like a concern. Thanks for the update!
Posts: 132
Joined: 10/22/2015
Location: Boise, ID USA
Posts: 286
Joined: 2/26/2012
Location: Tulsa, OK USA
FWIW, here's what the OEM louvers look like. Different design than the stock black ones that came from the factory on my 17 450.
Posts: 117
Joined: 11/14/2016
Location: Round Rock, TX USA
Posts: 1008
Joined: 5/5/2011
Location: Virginia Beach, VA USA
anyone else confirm a color and quality change from the Polisport product,or where to get the OEM version?
Posts: 635
Joined: 12/29/2012
Location: WI, USA
Acerbis sells them in the correct orange color. RMATV has them in stock.
https://www.rockymountainatvmc.com/p/1046/84216/Acerbis-Radiator-Louvers?v=12468
Posts: 1482
Joined: 1/9/2010
Location: Riverside, CA USA
No longer available from KTM in orange....just black. Just got off the dealer website to check for you guys.
twist wrist and go...
brad@palmspringsmotorsports.com
Posts: 117
Joined: 11/14/2016
Location: Round Rock, TX USA
Posts: 1008
Joined: 5/5/2011
Location: Virginia Beach, VA USA
Somehow I completely missed these. However I did call RMATV and the person pulled a set of the polisport ones for me and said they were bright KTM orange. Think I'll go acerbis though for the quality mentioned above.
Posts: 1117
Joined: 5/13/2015
Location: Utica, MI USA
The Acerbis ones matched 100% perfectly for me. 
Race Bike: 2018 KTM 350SXF
Other Bikes: 1985 CR80R, 1990 CR250R, 1998 PW80, Yeti SB130LR.
Sold: 2016 YZ250F, 2012 CRF250R
