Posts
2119
Joined
4/1/2008
Location
St. Michael
BB
adamdf
3/10/2017 3:07pm
3/10/2017 3:07pm
Hey guys,
Some of you might recall that I had to pull the motor out of my brand new 17 450 SXF and send it back to the dealership for Warranty repairs, KTM and the dealer honored the warranty. We now have the motor back and noticed that the Gear shift sensor does not seem to connect to anything. We initially thought the motor was tested with a different sensor than stock and therefore we spoke to the dealership and they ordered a new sensor with the correct part number and sent it for us, only to see that its the exact same one that came back with the motor and theres no way to connect it to the ECU. Ive attached some photos here of what I am talking about and am hoping that some of you can help.
Do you know if there is a KTM ECU wiring scheme that we can refer to?
See photos below:
The cable with the Red and White wires is the one for the Gear Sensor. We are assuming that it needs to plug into the Cable with the purple and blue wires but the plugs don't fit, they are the exact same size! Are we missing something here? Look forward to your replies and thanks!
The moto above with the male connector is the Gear Sensor
Some of you might recall that I had to pull the motor out of my brand new 17 450 SXF and send it back to the dealership for Warranty repairs, KTM and the dealer honored the warranty. We now have the motor back and noticed that the Gear shift sensor does not seem to connect to anything. We initially thought the motor was tested with a different sensor than stock and therefore we spoke to the dealership and they ordered a new sensor with the correct part number and sent it for us, only to see that its the exact same one that came back with the motor and theres no way to connect it to the ECU. Ive attached some photos here of what I am talking about and am hoping that some of you can help.
Do you know if there is a KTM ECU wiring scheme that we can refer to?
See photos below:
The cable with the Red and White wires is the one for the Gear Sensor. We are assuming that it needs to plug into the Cable with the purple and blue wires but the plugs don't fit, they are the exact same size! Are we missing something here? Look forward to your replies and thanks!
The moto above with the male connector is the Gear Sensor
Not sure if this photo helps you
The Shop
Post a reply to: HELP! 17 KTM 450 SXF ECU Wiring