Fastway evo peg install HELP!?

Related:
Create New Tag

12/26/2018 1:12 AM

Anyone install a pair of these and not have enough shims for the camber?

I have installed them in the lower position and even if I install all the shims on one side it isn’t enough to get the pegs to sit flat. So I either have to make a custom spacer or just back the screw out and loctitte it and hope it doesn’t move. Bit of a let down....

Photo

|

12/26/2018 3:57 AM

2016 crf 450

|

12/26/2018 8:28 AM
Edited Date/Time: 12/26/2018 8:30 AM

Longer screw? And maybe a nut to lock it down.

|

12/26/2018 8:55 AM

I just added some extra washers to get the adjustment as i wanted it on mine.

|

12/26/2018 10:49 AM

crf250pilot wrote:

Longer screw? And maybe a nut to lock it down.

Lock nuts a good idea thankyou

|

12/26/2018 10:54 AM

POWLEY256 wrote:

I just added some extra washers to get the adjustment as i wanted it on mine.

It needs 10mm of washers to get it flat. I’m thinking they sent the wrong fitment kit

|

12/26/2018 5:15 PM

Are you sure you have the sides correct?

The fastway peg posted appears to be the left one.

When I installed mine, I had them backwards because of the way it looked and had to correct the orientation.

|

12/26/2018 5:20 PM

2019 YZ450F

Photo
Photo

|

12/26/2018 5:32 PM

Looks like they sent the wrong footpeg looking at the angle of the mounts. I had the same issue when I got mine, they sent a footpeg suitable for a 16 250 EXC instead of a 17, but the mounts have a slight angle difference between the two models

|

James = #7. Malcolm = #27
7/27=0.259259259259259259259
Stewart return confirmed!

12/26/2018 6:04 PM

kennyc wrote:

2019 YZ450F

Photo
Photo

The stock yz peg is a better peg, why replace it, sharpen it up and let er rip!

|

12/26/2018 6:32 PM

kennyc wrote:

2019 YZ450F

Photo
Photo

Forty wrote:

The stock yz peg is a better peg, why replace it, sharpen it up and let er rip!

I agree. Only switched for lower peg height. With boots on, I’m almost 6’4”

|

12/26/2018 8:58 PM

kennyc wrote:

2019 YZ450F

Photo
Photo

Forty wrote:

The stock yz peg is a better peg, why replace it, sharpen it up and let er rip!

kennyc wrote:

I agree. Only switched for lower peg height. With boots on, I’m almost 6’4”

Ah! I see.

|

12/28/2018 4:48 AM

kennyc wrote:

Are you sure you have the sides correct?

The fastway peg posted appears to be the left one.

When I installed mine, I had them backwards because of the way it looked and had to correct the orientation.

Thanks, I definitely have them on the correct side they just sent me the wrong pegs. Also installing as I have long legs otherwise I would of stick with stock pegs. eBay seller hasn’t messaged back either as I already provided good feedback for the quick postage time

|