Fast By Ferracci Husqvarna Cr 250 help needed?/ Build

StormWorks 12/19/2021 9:24am
12/19/2021 9:24am
caviar&cigarettes338 wrote:
Little progress on bike. made a torque list for bolts so didn’t have keep looking on phone [img]https://p.vitalmx.com/photos/forums/2021/12/19/523543/s1200_AE9D15C0_769C_4494_A906_D35D65141E39.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/12/19/523542/s1200_CD658001_50B6_41CF_A3EC_9B5FD7514443.jpg[/img]
Little progress on bike. made a torque list for bolts so didn’t have keep looking on phone

Don’t forget a bit of resin or silicone to hold sprocket clip in place we used to do that on the team bikes
1
caviar&cigarettes338 12/19/2021 10:47am
12/19/2021 10:47am
caviar&cigarettes338 wrote:
[img]https://p.vitalmx.com/photos/forums/2021/12/19/523544/s1200_81DD37F4_A19A_452A_9AC2_5DF88BF7E93D.jpg[/img]

Just wanted to fit plastics befor graphics make sure everything lined up and I’m waiting on new tank I tried to get yellowing out of bottom of tank by rad shroud but it’s stained all way through.
1
caviar&cigarettes338 12/19/2021 4:40pm
12/19/2021 4:40pm
Still in need of titanium subframe and race ignition holder if anyone comes by one please let me know . I was lucky this past week and found a set of the original procircuit titanium foot pegs the team used back in 02 so just missing the subframe and race ignition holder now. Thanks everyone for the help
4

The Shop

See All »
caviar&cigarettes338 12/21/2021 4:13pm
12/21/2021 4:13pm
Little sneak peak of graphics on bike and got some
More ti bolts in today really sharp looking with these bolts got the other ones on last week


15
Nairb#70
Profile picture for user Nairb#70
Posts
891
Joined
2/25/2020
Location
Ivoryton, CT US
Nairb#70 12/25/2021 6:22pm
12/25/2021 6:22pm
I hope it's nice and warm where you live, so you can rip that thing. Do you have team gear for FBF So Cal to complete the effect?
Nairb#70
Profile picture for user Nairb#70
Posts
891
Joined
2/25/2020
Location
Ivoryton, CT US
Nairb#70 12/25/2021 6:23pm
12/25/2021 6:23pm
Nairb#70 wrote:
I hope it's nice and warm where you live, so you can rip that thing. Do you have team gear for FBF So Cal to complete...
I hope it's nice and warm where you live, so you can rip that thing. Do you have team gear for FBF So Cal to complete the effect?
Sorry, I think it wasTLD.
caviar&cigarettes338 12/25/2021 6:30pm
12/25/2021 6:30pm
Nairb#70 wrote:
I hope it's nice and warm where you live, so you can rip that thing. Do you have team gear for FBF So Cal to complete...
I hope it's nice and warm where you live, so you can rip that thing. Do you have team gear for FBF So Cal to complete the effect?
Nairb#70 wrote:
Sorry, I think it wasTLD.
Winter is terrible up here lol . Would lov to find some of that TLD gear that would be so cool !!
caviar&cigarettes338 12/27/2021 7:59am
12/27/2021 7:59am
Pretty dam happy found one of my last rare team item yesterday, FBF titanium subframe . Still can’t believe I found one of these

17
caviar&cigarettes338 12/27/2021 6:29pm
12/27/2021 6:29pm
Another cool find I have been looking for NOS from 2001 period correct renthal ultralite front sprocket same as team ran. Renthal doesn’t make these anymore for Italian husqvarnas just the solids ones not the ultralite like the team ran so pretty dam happy getting my hands on this .
9
Kelz87
Profile picture for user Kelz87
Posts
1024
Joined
7/21/2018
Location
Phoenix, AZ US
Kelz87 12/27/2021 6:57pm
12/27/2021 6:57pm
Are you gonna run a number on the plates?
caviar&cigarettes338 12/27/2021 7:18pm
12/27/2021 7:18pm Edited Date/Time 12/27/2021 7:21pm
Kelz87 wrote:
Are you gonna run a number on the plates?
Yes I have Evans #247 old numbers coming from a friend of his old mechanic at FBF Kibby. He post on vital sometimes.
3
SLAPAHO
Profile picture for user SLAPAHO
Posts
1460
Joined
8/15/2006
Location
Newport Beach, CA US
SLAPAHO 12/27/2021 7:52pm
12/27/2021 7:52pm
caviar&cigarettes338 wrote:
Pretty dam happy found one of my last rare team item yesterday, FBF titanium subframe . Still can’t believe I found one of these [img]https://p.vitalmx.com/photos/forums/2021/12/27/524997/s1200_9643BD46_4D52_46EB_989F_508C6C539F25.jpg[/img]
Pretty dam happy found one of my last rare team item yesterday, FBF titanium subframe . Still can’t believe I found one of these

I can’t believe you found that subframe! I did a probably 30min search while bored at work last week and the only thing that ever came up was some dude with a husky dual sport?? 😅.
Stoked for you for finding one 👍👍
2
Last Braaap
Profile picture for user Last Braaap
Posts
1475
Joined
4/19/2019
Location
Somewhere over the rainbow CZ
Last Braaap 12/27/2021 8:23pm
12/27/2021 8:23pm
caviar&cigarettes338 wrote:
Another cool find I have been looking for NOS from 2001 period correct renthal ultralite front sprocket same as team ran. Renthal doesn’t make these anymore...
Another cool find I have been looking for NOS from 2001 period correct renthal ultralite front sprocket same as team ran. Renthal doesn’t make these anymore for Italian husqvarnas just the solids ones not the ultralite like the team ran so pretty dam happy getting my hands on this .
I can't wrap my head around how can people have like 20 years old discontinued parts in original wrap somewhere. Blink You are magician or are using time travel the whole time. Grinning
8
caviar&cigarettes338 12/27/2021 8:31pm
12/27/2021 8:31pm
caviar&cigarettes338 wrote:
Pretty dam happy found one of my last rare team item yesterday, FBF titanium subframe . Still can’t believe I found one of these [img]https://p.vitalmx.com/photos/forums/2021/12/27/524997/s1200_9643BD46_4D52_46EB_989F_508C6C539F25.jpg[/img]
Pretty dam happy found one of my last rare team item yesterday, FBF titanium subframe . Still can’t believe I found one of these

SLAPAHO wrote:
I can’t believe you found that subframe! I did a probably 30min search while bored at work last week and the only thing that ever came...
I can’t believe you found that subframe! I did a probably 30min search while bored at work last week and the only thing that ever came up was some dude with a husky dual sport?? 😅.
Stoked for you for finding one 👍👍
I’m pretty sure seen that one also was thinking how could I make that work lol.
1
caviar&cigarettes338 12/27/2021 8:39pm
12/27/2021 8:39pm Edited Date/Time 12/27/2021 8:39pm
caviar&cigarettes338 wrote:
Another cool find I have been looking for NOS from 2001 period correct renthal ultralite front sprocket same as team ran. Renthal doesn’t make these anymore...
Another cool find I have been looking for NOS from 2001 period correct renthal ultralite front sprocket same as team ran. Renthal doesn’t make these anymore for Italian husqvarnas just the solids ones not the ultralite like the team ran so pretty dam happy getting my hands on this .
Last Braaap wrote:
I can't wrap my head around how can people have like 20 years old discontinued parts in original wrap somewhere. :blink: You are magician or are...
I can't wrap my head around how can people have like 20 years old discontinued parts in original wrap somewhere. Blink You are magician or are using time travel the whole time. Grinning
Lol yeah I have been spending stupid amounts of hours every day/night the last 4 months searching every country’s ebays and every Facebook market place or husky page and Craigslist/kijiji here in Canada . I must spend at least 4 hours every day/night doing that the last 4 months. I have gotten parts from Canada,UK,Germany,Netherlands and a lot from the US. it’s been paying off and it’s almost over thank god!!! lol
7
StormWorks 12/28/2021 2:19pm
12/28/2021 2:19pm
caviar&cigarettes338 wrote:
Another cool find I have been looking for NOS from 2001 period correct renthal ultralite front sprocket same as team ran. Renthal doesn’t make these anymore...
Another cool find I have been looking for NOS from 2001 period correct renthal ultralite front sprocket same as team ran. Renthal doesn’t make these anymore for Italian husqvarnas just the solids ones not the ultralite like the team ran so pretty dam happy getting my hands on this .
Last Braaap wrote:
I can't wrap my head around how can people have like 20 years old discontinued parts in original wrap somewhere. :blink: You are magician or are...
I can't wrap my head around how can people have like 20 years old discontinued parts in original wrap somewhere. Blink You are magician or are using time travel the whole time. Grinning
Err err we just keep the stuff thinking one day it will come in for something and hey presto 20 years fly by and some folks are building replicas or trying to restore the original works bikes they just happened to find from someone who didn’t know what they had
We still have some old stock we have even still got a prototype rear end for the factory husqvarnas from 1998 and 99 with a carbon air box we just don’t have a right side panel or the seat that fits it correctly it might come in if we find a decent donor bike to do a replica
1

Pit Row

See All »
StormWorks 12/28/2021 2:25pm
12/28/2021 2:25pm
caviar&cigarettes338 wrote:
Another cool find I have been looking for NOS from 2001 period correct renthal ultralite front sprocket same as team ran. Renthal doesn’t make these anymore...
Another cool find I have been looking for NOS from 2001 period correct renthal ultralite front sprocket same as team ran. Renthal doesn’t make these anymore for Italian husqvarnas just the solids ones not the ultralite like the team ran so pretty dam happy getting my hands on this .
Last Braaap wrote:
I can't wrap my head around how can people have like 20 years old discontinued parts in original wrap somewhere. :blink: You are magician or are...
I can't wrap my head around how can people have like 20 years old discontinued parts in original wrap somewhere. Blink You are magician or are using time travel the whole time. Grinning
caviar&cigarettes338 wrote:
Lol yeah I have been spending stupid amounts of hours every day/night the last 4 months searching every country’s ebays and every Facebook market place or...
Lol yeah I have been spending stupid amounts of hours every day/night the last 4 months searching every country’s ebays and every Facebook market place or husky page and Craigslist/kijiji here in Canada . I must spend at least 4 hours every day/night doing that the last 4 months. I have gotten parts from Canada,UK,Germany,Netherlands and a lot from the US. it’s been paying off and it’s almost over thank god!!! lol
All keep your eyes open We are looking for a ti subframe for a FBF 125 build for 2022 We have a genuine frame, triple clamps and forks We have a stamped engine but We re not sure it’s genuine need to get into it makes sure it has the works transmission, shifter shaft, kickstarter idler etc
Any info or contacts would be appreciated
caviar&cigarettes338 12/29/2021 2:19pm
12/29/2021 2:19pm
My good friend that works at a bike shop is doing the graphics for me putting them on since local decal shop refused since the graphics were 20 years old they refused to do them . But I told my buddy just take his time take couple weeks and no rush, he sent photos what he got done so far and loving it and feeling pretty dam excited see it getting done can’t wait see bike all together with graphics and ti subframe wheels going be so on point . Really still can’t believe it all coming together dream come true for me 20 years since first seen bike in magazines !!!


22
TK40_FC
Profile picture for user TK40_FC
Posts
247
Joined
5/17/2021
Location
Canton, OH US
TK40_FC 12/29/2021 2:58pm
12/29/2021 2:58pm
Looks good!
2
aeffertz
Profile picture for user aeffertz
Posts
7947
Joined
7/16/2015
Location
Eau Claire, WI US
aeffertz 12/29/2021 3:19pm
12/29/2021 3:19pm
Hell yeah man! Don’t you love the feeling of finding that rare part after hours and hours and days of checking the same search terms over and over?

Glad you found that subframe!
2
caviar&cigarettes338 12/29/2021 3:35pm
12/29/2021 3:35pm
aeffertz wrote:
Hell yeah man! Don’t you love the feeling of finding that rare part after hours and hours and days of checking the same search terms over...
Hell yeah man! Don’t you love the feeling of finding that rare part after hours and hours and days of checking the same search terms over and over?

Glad you found that subframe!
Yeah I couldn’t believe when I got the message from the guy I still don’t believe it kind of. I was told by other people I would never find one only a handful were made for the team . The one mechanic from FBF that sells stuff on eBay said I would never find one and pretty much laughed at me for asking him about it . it was a guy on Facebook page for Italian husqvarna I posted few weeks back asking anyone for help finding one and he messaged me back still just a couple days ago, can’t believe it lol. He got from FBF 16 years ago he said when the team was shutting down selling everything off he lived in PA at that time and owned a 1998 or 1999 husky wr but the subframe never fit it and had just held on to it since lucky for me .
5
1911
Profile picture for user 1911
Posts
3305
Joined
4/2/2008
Location
LAS VEGAS, NV US
1911 12/29/2021 4:58pm
12/29/2021 4:58pm
caviar&cigarettes338 wrote:
My good friend that works at a bike shop is doing the graphics for me putting them on since local decal shop refused since the graphics...
My good friend that works at a bike shop is doing the graphics for me putting them on since local decal shop refused since the graphics were 20 years old they refused to do them . But I told my buddy just take his time take couple weeks and no rush, he sent photos what he got done so far and loving it and feeling pretty dam excited see it getting done can’t wait see bike all together with graphics and ti subframe wheels going be so on point . Really still can’t believe it all coming together dream come true for me 20 years since first seen bike in magazines !!!


Snooker table? Great build thread. Bike will look fantastic.
caviar&cigarettes338 12/29/2021 5:18pm
12/29/2021 5:18pm
caviar&cigarettes338 wrote:
My good friend that works at a bike shop is doing the graphics for me putting them on since local decal shop refused since the graphics...
My good friend that works at a bike shop is doing the graphics for me putting them on since local decal shop refused since the graphics were 20 years old they refused to do them . But I told my buddy just take his time take couple weeks and no rush, he sent photos what he got done so far and loving it and feeling pretty dam excited see it getting done can’t wait see bike all together with graphics and ti subframe wheels going be so on point . Really still can’t believe it all coming together dream come true for me 20 years since first seen bike in magazines !!!


1911 wrote:
Snooker table? Great build thread. Bike will look fantastic.
Yes it’s a snooker table not mine the pictures are my friend sent me he’s putting graphics on my plastics at his house .
2
StormWorks 12/30/2021 12:51am
12/30/2021 12:51am
caviar&cigarettes338 wrote:
My good friend that works at a bike shop is doing the graphics for me putting them on since local decal shop refused since the graphics...
My good friend that works at a bike shop is doing the graphics for me putting them on since local decal shop refused since the graphics were 20 years old they refused to do them . But I told my buddy just take his time take couple weeks and no rush, he sent photos what he got done so far and loving it and feeling pretty dam excited see it getting done can’t wait see bike all together with graphics and ti subframe wheels going be so on point . Really still can’t believe it all coming together dream come true for me 20 years since first seen bike in magazines !!!


They look bad ass dude 20 years old and still awesome
spindel
Profile picture for user spindel
Posts
31
Joined
2/19/2013
Location
Lebanon, PA US
spindel 12/30/2021 5:47am
12/30/2021 5:47am
Last Braaap wrote:
I can't wrap my head around how can people have like 20 years old discontinued parts in original wrap somewhere. :blink: You are magician or are...
I can't wrap my head around how can people have like 20 years old discontinued parts in original wrap somewhere. Blink You are magician or are using time travel the whole time. Grinning
caviar&cigarettes338 wrote:
Lol yeah I have been spending stupid amounts of hours every day/night the last 4 months searching every country’s ebays and every Facebook market place or...
Lol yeah I have been spending stupid amounts of hours every day/night the last 4 months searching every country’s ebays and every Facebook market place or husky page and Craigslist/kijiji here in Canada . I must spend at least 4 hours every day/night doing that the last 4 months. I have gotten parts from Canada,UK,Germany,Netherlands and a lot from the US. it’s been paying off and it’s almost over thank god!!! lol
StormWorks wrote:
All keep your eyes open We are looking for a ti subframe for a FBF 125 build for 2022 We have a genuine frame, triple clamps...
All keep your eyes open We are looking for a ti subframe for a FBF 125 build for 2022 We have a genuine frame, triple clamps and forks We have a stamped engine but We re not sure it’s genuine need to get into it makes sure it has the works transmission, shifter shaft, kickstarter idler etc
Any info or contacts would be appreciated
Contact Scott at toy tech cycles. I spoke with him last night and I believe he has a ti subframe for a 125.
1
StormWorks 12/30/2021 6:27am
12/30/2021 6:27am
caviar&cigarettes338 wrote:
Lol yeah I have been spending stupid amounts of hours every day/night the last 4 months searching every country’s ebays and every Facebook market place or...
Lol yeah I have been spending stupid amounts of hours every day/night the last 4 months searching every country’s ebays and every Facebook market place or husky page and Craigslist/kijiji here in Canada . I must spend at least 4 hours every day/night doing that the last 4 months. I have gotten parts from Canada,UK,Germany,Netherlands and a lot from the US. it’s been paying off and it’s almost over thank god!!! lol
StormWorks wrote:
All keep your eyes open We are looking for a ti subframe for a FBF 125 build for 2022 We have a genuine frame, triple clamps...
All keep your eyes open We are looking for a ti subframe for a FBF 125 build for 2022 We have a genuine frame, triple clamps and forks We have a stamped engine but We re not sure it’s genuine need to get into it makes sure it has the works transmission, shifter shaft, kickstarter idler etc
Any info or contacts would be appreciated
spindel wrote:
Contact Scott at toy tech cycles. I spoke with him last night and I believe he has a ti subframe for a 125.
Thanks very much I will send him and email now fingers crossed
caviar&cigarettes338 12/30/2021 3:01pm
12/30/2021 3:01pm
Little surprise when I got home thanks Bob. I have been getting worried these got lost in mail no tracking number and it’s been 2 months since they shipped out to me from Australia but really happy to have Tyler Evans Original #s from when he rode for FBF in 2002
15
caviar&cigarettes338 1/1/2022 4:29am
1/1/2022 4:29am
Period correct from early 2000s procircuit titanium foot pegs same exact ones team used with NOS FBF ti pins . Super happy on these !!!





10

Post a reply to: Fast By Ferracci Husqvarna Cr 250 help needed?/ Build