Dirtbike detailing

camjm2
Posts
15
Joined
6/23/2020
Location
Fairfax, VT US
Anybody know of someone in Vermont that does detailing on dirtbikes?
3
|
lostboy819
Posts
11509
Joined
8/16/2006
Location
Somewhere, CO US
Fantasy
1442nd
6/24/2020 3:22pm
Anyone who does car and motorcycle detailing would be able to do it for you, the only question is WHY ? Wink
1
aeffertz
Posts
9274
Joined
7/16/2015
Location
Eau Claire, WI US
6/24/2020 3:25pm
No, but there's a guy on here that will clean your gear for you.
#everythread
4
Mr. Ted
Posts
1592
Joined
5/7/2010
Location
Atoka, TN US
Fantasy
1623rd
6/24/2020 5:07pm
No, but there's a guy on here that will clean your gear for you.
Thought it was boots only?

The Shop

6/24/2020 5:45pm
No, but there's a guy on here that will clean your gear for you.
Mr. Ted wrote:
Thought it was boots only?
Pretty sure he said he’d clean all gear as long as he got some muddy white boots with them.
1
Dirtydeeds
Posts
2693
Joined
3/22/2016
Location
US
Fantasy
2888th
6/24/2020 7:26pm
No, but there's a guy on here that will clean your gear for you.
Mr. Ted wrote:
Thought it was boots only?
Pretty sure he said he’d clean all gear as long as he got some muddy white boots with them.
Wish he lived closer
2
Pink
Posts
161
Joined
1/31/2020
Location
Greenville, SC US
6/25/2020 1:42am
No, but there's a guy on here that will clean your gear for you.
I bet he would be willing to put lotion on you, if you wanted him to. For free.
6
Boomslang
Posts
6922
Joined
12/22/2018
Location
Cape Town ZA
Fantasy
548th
6/25/2020 2:19am
camjm2 wrote:
Anybody know of someone in Vermont that does detailing on dirtbikes?
Do it yourself, thats part of the fun owning a dirtbike and a time to get to know you bike intimately...when I wash and clean our bikes my eyes are all over the bike and sometimes you pick up issues which otherwise would not have been found until something breaks are fails.

One area that is often neglected are the electric. The plugs etc need to be cleaned and inspected for rust and corrosion.

I know time is a factor when having a full time job but it needs to be done.
1
joe velna
Posts
27
Joined
12/1/2014
Location
Rockford, IL US
6/25/2020 10:25am
You would be wasting your money. Use your pressure washer to clean the dirt off, then get a bucket of dish soap and water and use a brush to scrub everything, wheels etc. use simple green and scotch brite on the frame and all of the aluminum. Clean the soap off with the pressure washer. Hand dry it with a towel or micro fiber. Then spray sc1 or Lucas oil slick mist on all of the plastics and wipe it clean. Make sure you dry your wheels and and get in between the spokes. It turns out new everytime.
Boomslang
Posts
6922
Joined
12/22/2018
Location
Cape Town ZA
Fantasy
548th
6/25/2020 10:34am
joe velna wrote:
You would be wasting your money. Use your pressure washer to clean the dirt off, then get a bucket of dish soap and water and use...
You would be wasting your money. Use your pressure washer to clean the dirt off, then get a bucket of dish soap and water and use a brush to scrub everything, wheels etc. use simple green and scotch brite on the frame and all of the aluminum. Clean the soap off with the pressure washer. Hand dry it with a towel or micro fiber. Then spray sc1 or Lucas oil slick mist on all of the plastics and wipe it clean. Make sure you dry your wheels and and get in between the spokes. It turns out new everytime.
The ideal wash is to remove the seat, tank and radiator shrouds, that way you get to clean all the electrics and other hard to get to components. Also a great time to inspect under there and properly service and lube all plugs and wiring to prevent corrosion.

Sure it is extra work but we call it preventative maintenance. It pays in the long run.
MotofactioN
Posts
655
Joined
6/25/2020
Location
Gloucester, VA US
6/25/2020 12:11pm
Nothing more rewarding than getting that bike that’s covered in sand and mud, squeaky clean, ready to ride again!

Especially when a lot of people are lazy about washing their bikes and you show up with not a spec on your engine or under the rear fender Cool
1
Goon126
Posts
356
Joined
1/18/2019
Location
CA US
6/25/2020 1:40pm
When you get your dirtbike detailed make sure they put Armor All on your foot pegs and grips. And an air freshener on the bars. 👍🏼👍🏼
2

Post a reply to: Dirtbike detailing

The Latest